UV-resistant high density polyethylene (HDPE) or polypropylene (PP) safety helmet. Low density (LDPE) polyethylene cradle with 8 fixing points. Sweat band. Manual adjustment: head sizes 53/63 cm. Electrical Insulation up to 1 000 V.A.C. or 1 500 V.D.C. Standard holes for accessories. Anchorage for chin straps with 2 or 4 points.

Helmet: high density polyethylene (HDPE) or polypropylene (PP).
Harness: LDPE. Sweat band: polyester foam.

The VisiLite® helmet illumination system has been developed as a method of increasing worker visibility without dazzling colleagues in close proximity. VisiLite®offers three lighting modes to suit the user's needs.

50m Visibility

• Independently tested for luminous intensity, visibility in darkness & flash rate
• During optical testing Visilite® remained visible up to a distance of 50m

Easy Secure Fit

• Simply clip onto the sides and rear of the safety helmet
• Quick release for replacement or USBcharging

USB Rechargeable

• Easily rechargeable with a USB charging supply; PC, Mains or Car
• Can be charged while fitted to the helmet
• Micro USB cable supplied
• Charge time: approximately 2.5 Hours

Durable

• The clips and main housing are made from highly durable ABS
• The main housing is sealed to protect against dust and dirt

Adverse Weather

• Visilite® is splash proof making it suitable for use in wet weather conditions
• It has an operating Temperature Range of:+50ºC to -10ºC (14ºF and 122ºF)

Modes & Runtimes
 

• Mode1: Static (9hrs
• Mode2: Fast flash (150hrs)
• Mode3: Slow flash (190hrs)

Sport look bump cap with large mesh panel on the top, allowing maximum airflow. Reflective stripes for enhanced visibility and style (on navy option only). Hook and loop adjustable size. 

• CE certified
• Long peak (7cm) for maximum protection against shock and light
• Inner ABS shell and soft pad for shock absorption
• Durable high density EVA protects and gives comfort to the wearer
• Retail bag which aids presentation for retail sales

100% cotton • Compatible with ear-defenders • Flame retardancy up to 25 washings* • Water repellant • Bright yellow for greater visibility

The new, lightweight uvex pheos S-R safety helmet with pre-mounted 4-point chin strap and short brim with sporty, mountaineer design offers maximum wearer comfort thanks to the climazone ventilation and the wheel ratchet for stepless width adjustment.

General features

• safety helmet with slot on the front for helmet lights
• side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
• with short brim

Protection features

• meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash
• 4-point chin strap ensures reliable fit at all times

Comfort features

• three variable air vents for maximum ventilation
• conventional suspension harness for comfortable adjustable fit
• six-point textile band attachment ensures optimal fit and comfort

• General features

• multifunctional helmet for working at heights and rescue operations
• combination of features from the industrial protection helmet (EN 397) with the requirements for a climbing helmet (EN 12492)
• safety helmet with slot on the front for helmet lights
• side Euroslot adapters (30 mm) for attaching earmuffs or the uvex pheos visor system
• options for attaching head torches, goggles and face protection
• available in: white, yellow, orange, red, green, blue, black

Comfort features

six-point textile band attachment ensures optimal fit and great comfort suspension harness with wheel ratchet for variable width adjustment delivered as standard with a black PU sweatband (art. no. 9760.009); there is also an option of a light sweatband made of synthetic leather (art. no. 9760.005)

Protection features

meets standard EN 397 and additional requirement for very low temperatures (-30 °C) firmly riveted four-point chin strap for use in accordance with EN 12492 chin strap included (art. no. 9790.005) for use in accordance with EN 397 light ABS helmet shell offers high level of protection and durability

Surefit™ Thermal Helmet Liner - Large/Extra Large
The SureFit™ Thermal Helmet Liner is fully approved to be worn with all JSP EVO® Safety Helmets. It prevents workers from wearing incompatible and dangerous alternatives such as hoodies underneath their helmets. It provides all day comfort and warmth.

Thermal insulation
The SureFit™ Thermal Helmet Liner provides the wearer with warmth and protection from cold environments. The deep edges are designed to cover the entire ear.

Fully compatible
The SureFit™ Thermal Helmet Liner is compatible with all JSP safety helmets. The stretchy material provides a nice tight fit for minimal interference and maximum comfort and warmth.

Convenient & Hygienic
The SureFit™ Thermal Helmet Liner is lightweight for all day comfort and is also machine washable at 30°C for hygiene purposes.

Ideal for working at height. A 4-point chin strap harness that fits the EVOLite® & EVO2/3/5® Safety Helmets Conforms to EN397 & EN50365

Honeywell Clearways browguard offers both strength and durability with economical replacement visors available in acetate or polycarbonate. Strong and durable construction. Excellent comfort over long periods of use due to its lightweight design.

Compatible with visor SHF021

Honeywell clear acetate 200 mm visor offers both strength and durability. Compatible with SHF020 browguard.  General use and protection against medium energy impact (120m/s). Protection against splashes of liquids. Visor fitting will help add extra protection from chemicals. Conforms to EN166 1 F 3

*This product does not include browguard*

Compatible browguard: SHF020

Premium Bump Cap with 2.5cm Micro-Peak
•    Excellent Breathability for reduced perspiration over extended periods of usage
•    Removable inner for ease of embroidery
•    High-Vis piping
•    2.5cm Micro-Peak 

With its strong chinstrap, the VERTEX VENT helmet sets the standard in head protection for workers at height. It has ventilation holes with sliding shutters to allow the ventilation to be adjusted as needed. Its six-point textile suspension ensures maximum comfort, and its CenterFit adjustment system adjusts the headband and keeps the helmet centered on the head.

• Excellent protection for work at height:
  - shock absorption achieved through deformation of the outer shell
  - strong chinstrap (more than 50 daN) limits the risk of losing the helmet during a fall
   
• Very comfortable to wear:
  - six-point textile suspension conforms perfectly to the shape of the head
  - CenterFit adjustment system adjusts the headband and keeps the helmet centered on the head
  - vent holes with sliding shutters allow the ventilation to be adjusted as needed, while wearing the helmet
  - comes with two sizes of headband foam

• Head circumference: 53-63 cm
• Weight: 455 g
• Material(s): ABS, nylon, polycarbonate, high-strength polyester, polyethylene
• Certification(s): CE, EN 397, EN 12492, ANSI Z89.1 Type I Class C, EAC

• The 3M™ Peltor™ Optime™ III is a high performance hearing protector and has been developed for use in extremely noise environments. The protection is based on a technology with a double casing minimising resonance in the holder casing, maximising high-frequency attenuation. An acoustic connection between the inner volume and the volume between the casings in its turn provides low-frequency attenuation
• The 3M™ Peltor™ Optime™ III sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure, the earmuff stands for effective protection and highest comfort for the wearer. The product is also available in a dielectric version without visible metal parts and in High Viz green for workers who need hearing protection and be extra visible

ABS dual shell safety helmet with PC retractable visor. Sport and dynamic design. 3 textile straps with 6 fixing points. Foam sweat band. One-D Rotor clamping system: head size 53 to 63 cm. 2 possible positions of the headband (top/low) for a better comfort. Retro-reflective stickers. Electrical insulation up to 1 000 V.A.C. or 1 500 V.D.C, protection against arc fault Class 1 (GS-ET 29). Visor with anti-Fog N and anti-scratch K treatments and protection against electrical arcs, and molten metals or hot liquids projections.
ABS Dual-Shell.
Polycarbonate visor.


EN397:2012 + A1:2012 Protective helmets for industry  

MM Molten metal spray
LD Lateral deformation
-20°C +50°C Use : Very low temperature - -20°C / +50°C
440VAC Electric insulation
Electrically insulating helmets for use on low voltage installations
EN50365:2002 Electrically insulating helmets for use on low voltage installations  

CLASS 0 Electrically insulating helmets - Class 0
EN166:2001 Personal eye-protection - Specifications  

1 AT 8-1-0 9 KN Oculars
3 8-1 9 AT Frame
EN170:2002 Ultraviolet filters  

2C-1.2 echelon
Additional requirements electric arc protection.
GS-ET 29:2011-05 Additional requirements electric arc protection.  

8-1-0 Oculars
CLASS 1 Class
CLASS 0 Light transmittance class = Class 1 : (50% ≤ VLT(D65) < 75%) / Class 0 : (VLT(D65) ≥ 75%).
8-1 Frame

Stylish and modern "baseball" bump cap with removable plastic inner to facilitate embroidery. 5cm reduced peak for close up work. Stylish mesh side ventilation improves climate control and comfort. Adjustable back fastening for secure fit. High Visibility reflective piping allow for quick recognition in low light conditions. Please note: This cap is NOT a safety helmet and offers little or no protection from falling objects

Hardcap™ A1+ Bump Cap
The new HardCap™ A1+ is another major innovation from JSP in head protection design. Designed to exceed the most recent standards, EN812:2012, years of thought and design iterations have been undertaken to develop a product that is unrivalled in both performance and style. Sleek and low profile, it's almost impossible to distinguish from a standard 'high street' baseball cap.

The unique angled adjuster designed to fit under the occipital bone at the rear of the skull means that one size really does fit all, particularly when combined with the castellated protective liner. The liner is removable, therefore the cap part is machine-washable for hygiene purposes. It has a terrytowelling sweatband for added comfort and all colour-ways have subtle reflective piping for added visibility safety.

Reflective Piping
Reflective piping on all models adds extra visibility and therefore safety in all working environments.

Ventilation
Extra holes in the liner plus the two mesh panels on the outer mean added ventilation for coolness and comfort.

Unique Adjuster
Unique one-handed angled adjuster to quickly fit, giving true one size fits all. Sizing ranges from 53cm to 63cm headsize.

All Round Protection
The protective liner is removable, so the outer cap is fully washable for hygiene purposes and extended life cycle.

Sweat Band
Terry towelling sweatband adds comfort and absorption for the wearer.

The EVO®3 Comfort Plus helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the Evolution® 3D-Adjustment harness system. EVO®3 is an advancement of the long established MK®2 and Mk®3 helmets, which were first launched in the 1970's, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D-Adjustment harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.