Gloves :: Special Hazard

8" Cut Resistant Wrist Guard - Pair

£26.15

Code: GL252

Rhino Tilsatec, Construction, Manufacture, Utilities, Waste Recycling

When handling sharp parts or sheet materials the wrist guard offers EN388: 2016 level F cut protection to the lower arm and wrist area with adjustable hook and loop fastenings for an accurate fit.

The wrist guard is made from a durable cut and puncture resistant fabric designed to provide additional protection when worn with a cut resistant glove.

EN388: 2016 2 × 4 4 F
RhinoYarn® cut resistant technology
EN388: 2016 level 4 puncture resistance
Protects the wrist and lower arm
Adjustable sizing for accurate fit and wearer comfort
Dark colour hides dirt
Will not mark glass panels

Availability: Available in 3-10 days

Minimum quantity for "8" Cut Resistant Wrist Guard - Pair" is 1.

Ansell ActivArmr® 42-474 Heat Resistant Gauntlet

£22.32

Code: GL904P

KEY FEATURES AND BENEFITS
•   Non-woven felt insulation and a full-length heat barrier designed for intermittent handling of dry objects up to 250°C / 480°F
•   Two-piece construction eliminates outseams for better finger comfort, dexterity and flexibility
•   Bonded nitrile coating protects against snags, punctures, abrasions and cuts
•   Provides excellent grip when handling dry or oily surfaces
•   Comfortable & flexible: sweat absorbent non-woven felt inner
•   Contains no asbestos
•   Compliant to FDA food handling requirements

Availability: In stock

Anti-Impact Cut Resistant Glove

£15.09

Code: SGL901P

A flexible seamless cut resistant level D glove with foam nitrile on the palm to maximize grip and TPR on the back to protect against shocks.

Cut resistance: level D (EN388:2016)

13 gauge (HPPE, steel) liner offers great dexterity for fine handling

Excellent grip with a nitrile foam sandy coating on the palm.

Red nitrile foam for increased visibility A Dense, moulded TPR protection zones on knuckles, fingers, thumb and back of hand.

TPR zones are sewn to the liner for increased resistance A Elasticated wrist provides a secure fit

Availability: In stock

Minimum quantity for "Anti-Impact Cut Resistant Glove" is 10.

Anti-Needle 5 Fully Coated

£40.53

Code: SGL191P

Cut Resistant, Fully Coated, Needle Protection, Puncture Resistant

The patented “Antineedle 5” is a 10 gauge fully coated anti needle glove.
• The glove offers both cut and puncture protection from hazardous objects. E.g. nails, wire,
glass fragments, metal shards, wood splinters and needles.
• The glove has been designed to enable a user to work in areas where there are risks of finding
discarded syringes.
• The glove offers puncture protection in the palm and fingers. The crinkled latex coating offers
excellent grip, and suitable for use in wet and dry environments. The back is breathable which
offers some comfort to the wearer.
• The gloves are lined with 10 layers of stainless-steel fabric, thus providing excellent puncture
resistant to pointed surfaces such as needles.

Availability: In stock

Anti-Vibration Mechanic's Air Glove

£68.05

Code: GL408P

Construction, Forestry/Horticulture, Utilities

IMPACTO¸ Anti-Vibration Mechanic's style Air-Glove¸ Full finger style provides maximum hand protection. Helps prevent Hand-Arm Vibration syndrome (HAVS) and White Finger Disease. Utilizes patented Air Glove¸ technology in the palm, fingers and thumb. Meets anti-vibration glove standards

Availability: In stock

Aqua-Seal Pro Waterproof Impact Protection Glove

£22.80

Code: SGL366P

The Aqua-Seal Pro is 100% waterproof and offers comprehensive protection for the hand against multiple hazards. TPR protective pods across the back of the hand provides protection against impact risks to the hand. A 100 gram Insulatex lining gives excellent thermal insulation properties.

? Maximum impact protection using TPR pod technology ? PVC dotted palm for enhanced grip ? Waterproof keeping the wearer dry and protected from the elements ? Specially designed for use in cold conditions ? Prevents grease, oil and water penetration ? Low risk cut protection ? CE certified ? UKCA marked

Standards EN ISO 21420: 2020 Dexterity 5 EN 388: 2016 + A1: 2018 (2132B) EN 511: 2006 (221)

Availability: In stock

Cofra HYDRONIT Cold Protection Gloves

£9.92

Code: SGL268P

Airport, Construction, Logistics

Excellent for work environments with temperature up to -30°C, lining made of three layers granting flexibility, waterproofness and heat protection
Softshell fabric grants flexibility and the internal COFRA-TEX membrane makes the gloves waterproof, windproof and breathable.
The soft internal pile increases heat sensation thanks to thermo-regulating COFRA-TEX membrane which, together with the waterproof glove construction, is capable of providing a new solution to the most demanding work.
Suitable for outdoor environments in windy and rainy areas the COFRA-TEX membrane creates an internal microclimate which remains unchanged if there is wind (WIND CHILL) and humidity.
Long neoprene cuff with Velcro closure covering the entire sleeve to avoid the entrance of cold air and water.
Palm breathability: 3.0 mg/cm²h

Availability: In stock

Cut 5 Cold Grip Glove

£11.32

Code: GL202P

Construction1, Engineering, Fishing, Forestry/Horticulture, Highways, Manufacture, Utilities, Washing & Janitorial, Waste Recycling

Cut 5 Cold Grip Glove

Availability: In stock

Minimum quantity for "Cut 5 Cold Grip Glove" is 12.

Cut 5 Foam Nitrile Palm-Coated Gloves

£8.45

Code: GL205P

Construction, Engineering, Manufacture

Cut 5 Foam Nitrile Palm-Coated Gloves

Availability: In stock

Minimum quantity for "Cut 5 Foam Nitrile Palm-Coated Gloves" is 10.

Cut 5 Nitrile Foam Glove

£7.38

Code: GL247P

Rhino Tilsatec

Very comfortable, light and highly cut resistant glove with excellent grip properties and abrasion resistance. Proven in the glass industry with the added benefit of non-marking coating that doesn't leave marks on the surface of sealed units. Also has heat resistance. Great for handling warm, sharp metal parts.

Availability: In stock

Minimum quantity for "Cut 5 Nitrile Foam Glove" is 12.

Cut 5 Nitrile Oil Grip Glove

£7.93

Code: GL164P

Cut 5 Nitrile Oil Grip Glove

Availability: In stock

Minimum quantity for "Cut 5 Nitrile Oil Grip Glove" is 10.

Cut 5 [C] PU Coated Glove

£5.82

Code: SGL096P

Cut 5 PU Coated Glove

Availability: In stock

Minimum quantity for "Cut 5 [C] PU Coated Glove" is 10.

Cut 5 [F] Nitrile Foam High Dexterity Glove

£4.99

Code: SGL220P

• The TEK 6000 is a nitrile foam, level 5 / letter F cut resistant glove.
• It is manufactured using Tsunooga ® cut resistant fibres. Thus, offering high protection from
cuts.
• The glove offers both good dexterity and high level of comfort whilst offering protection to
the user from serious injury.
• The glove has achieved a letter F

Availability: In stock

Minimum quantity for "Cut 5 [F] Nitrile Foam High Dexterity Glove" is 100.

Deep Blue Thermal Waterproof Glove

£11.62

Code: SGL157P

Construction, Manufacture, Washing & Janitorial

Fully dipped nitrile foam coated with a polar fleece lining. Keeps hands dry and warm in temperatures down to minus 20°C. Highest abrasion resistance score of 4 under the EN388 standard, the lifespan of the glove is also longer than traditional leather gloves as DeepBlue Winter can be washed regularly at 40°C without affecting performance.

Availability: In stock

Minimum quantity for "Deep Blue Thermal Waterproof Glove" is 10.

DEXTERITY® Titan Armour Needlestick Grip Glove

£46.41

Code: SGL280P

Dexterity® 10-Gauge Cotton/Poly Knit Glove with Hi-Viz Latex Palm Lined with Punkban

FEATURES
• Dependable grip , excellent flexibility and a comfortable ergonomic shape.
• Puncture-resistant latex coating
• Lined with two layers of Punkban
• Makes a great general-purpose work glove
• ASTM F2878 6.73 newtons of puncture protection (hypodermic needle)

• EN388: 2016
• Level 3 - Abrasion
• Level 4 - Cut Resistance (Coupe Test)
• Level 3 - Tear Resistance
• Level 4 - Puncture
• Level E - ISO 13997 Cut Resistance

• Please note: there is no European standard for needle resistance. Current industry practice is to utilize the American Standard ASTM F2878 as a guide, and to allow comparisons between different products. Your own risk assessment therefore needs to be undertaken to decide the suitability of this product.

APPLICATIONS
Lumber Yards
Plywood
Material Handling
Waste Handling
Recycling

Availability: In stock

Dyneema Fine Cut Resistant Glove

£7.91

Code: GL069P

Dyneema Fine Cut Resistant Glove

Availability: In stock

Minimum quantity for "Dyneema Fine Cut Resistant Glove" is 10.

T: 0800 122 33 23

Special Hazard

Special Hazard

Recently Viewed

General

Customer Services

Account Info

Sign up to our news and offers:

T: 0800 122 33 23

Special Hazard

Special Hazard

Recently Viewed

General

Customer Services

Account Info

Sign up to our news and offers:

Get social