Surefit™ Thermal Helmet Liner - Large/Extra Large
The SureFit™ Thermal Helmet Liner is fully approved to be worn with all JSP EVO® Safety Helmets. It prevents workers from wearing incompatible and dangerous alternatives such as hoodies underneath their helmets. It provides all day comfort and warmth.

Thermal insulation
The SureFit™ Thermal Helmet Liner provides the wearer with warmth and protection from cold environments. The deep edges are designed to cover the entire ear.

Fully compatible
The SureFit™ Thermal Helmet Liner is compatible with all JSP safety helmets. The stretchy material provides a nice tight fit for minimal interference and maximum comfort and warmth.

Convenient & Hygienic
The SureFit™ Thermal Helmet Liner is lightweight for all day comfort and is also machine washable at 30°C for hygiene purposes.

With its strong chinstrap, the VERTEX VENT helmet sets the standard in head protection for workers at height. It has ventilation holes with sliding shutters to allow the ventilation to be adjusted as needed. Its six-point textile suspension ensures maximum comfort, and its CenterFit adjustment system adjusts the headband and keeps the helmet centered on the head.

• Excellent protection for work at height:
  - shock absorption achieved through deformation of the outer shell
  - strong chinstrap (more than 50 daN) limits the risk of losing the helmet during a fall
   
• Very comfortable to wear:
  - six-point textile suspension conforms perfectly to the shape of the head
  - CenterFit adjustment system adjusts the headband and keeps the helmet centered on the head
  - vent holes with sliding shutters allow the ventilation to be adjusted as needed, while wearing the helmet
  - comes with two sizes of headband foam

• Head circumference: 53-63 cm
• Weight: 455 g
• Material(s): ABS, nylon, polycarbonate, high-strength polyester, polyethylene
• Certification(s): CE, EN 397, EN 12492, ANSI Z89.1 Type I Class C, EAC

Ideal for working at height. A 4-point chin strap harness that fits the EVOLite® & EVO2/3/5® Safety Helmets Conforms to EN397 & EN50365

Stylish and modern "baseball" bump cap with removable plastic inner to facilitate embroidery. Side and top vents and inner foam cushion for improved user comfort. Adjustable back fastening for secure fit.

The EVO3™ Linesman helmet is based on the EVO3™ micro peak helmet, with 4-point chin strap harness, ideal for working at height. Suitable for Chainsaw use.

Tough HDPE shell
In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it's competitors.

Supreme Comfort
A 6-point textile cradle harness system offers unrivalled comfort.

Chamlon™ Sweatband
Cotton core sweatband with porous PU coating for maximum absorption. PH neutral, dermatologically tested.

3D-Adjustment harness system
Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.

Adjustment
OneTouch™ Slip Ratchet.

EVOSpec®
The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN 166.1.F

Universal Slots
Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

Electrical Insulation (Non-vented only)
The un-vented version meets EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

Recommended for:

mountaineering, rock climbing, rescue, work at height, forestry.

Weight: 410g.

External shell: advanced thermo material (ABS).

Inner shell: polystyrene (EPS).

Sizes: 55/63 cm.

UP/DOWN adjustable size system.

Certifications: CE EN 12492

Removable headband

Slots for ear protectors quick fixing system

Quick release system

Ventilation through 6 holes

Adjustable chinstrap

Headlamp clips

Adjustable and removable chinstrap

Details

• Protects wearer from light contact with stationary objects
• Provides industrial bump protection to EN812:A1
• Over-ear fabric panels support cold weather working
• Waterproof, breathable fabric maintains dryness and comfort
• Reduced peak length (55 mm) enhances upward vision
• 360° reflective safety strips help wearer to be seen
• Available in 3 colours (navy blue and high visibility yellow or orange)

3M™ First Base™ 3 Bump Cap Winter in navy blue provides head protection to EN812:A1. It combines a patented ergonomic ABS shell with over-ear fabric panels and a waterproof, breathable outer fabric.

Get head protection to EN812:A1 that also keeps workers warm and dry, with 3M™ First Base™ 3 Bump Cap Winter. This navy blue bump cap has over-ear fabric panels for cold weather environments, with a waterproof and breathable outer fabric to maintain dryness. This is combined with a patented acrylonitrile butadiene styrene (ABS) shell to guard against bumps and lacerations, while also being ergonomically shaped for comfort. 360° reflective strips help workers to remain visible in low light conditions. A reduced peak length (55 mm) enhances upward vision. 

Vented helmet. ABS shell, textile comfort harness 6 points, wheel ratchet adjustable size, 56-63 cm. Sweat band and chin strap included. Retractable clear visor included. Spare parts available. 

 

• CE certified
• Vented hard hat allowing a refreshing airflow around the head
• Lateral deformation
• Anti-scratch coating for added durability
• Anti-fog coating for additional comfort to the wearer
• 6 points textile harness
• Wheel ratchet size adjustment for easy fitting
• Chin strap included
• Retractable clear visor included
• 7 years shelf life from manufacturing date outlined in product user sheet

Honeywell clear acetate 200 mm visor offers both strength and durability. Compatible with SHF020 browguard.  General use and protection against medium energy impact (120m/s). Protection against splashes of liquids. Visor fitting will help add extra protection from chemicals. Conforms to EN166 1 F 3

*This product does not include browguard*

Compatible browguard: SHF020

SNR26. Fits safety helmets with 30mm slot fixing. Fully adjustable and can be folded up onto the safety helmet when not in use.

Surefit visor carrier and 20cm visor to fit EVO® range of safety helmets. Compatible with Sonis® Helmet Mounted range and the InterGP/EX helmet mounted ear defender range.

High-density polypropylene shell helmet, 4 points plastic suspension harness. Buckle adjustable size 55-62cm. Soft sweat band included. 

• CE certified
• Lateral deformation
• Electrical Properties ( 440Vac)
• Electrical insulation up to 1000Vac or 1500Vdc (EN 50365)
• 4 points plastic suspension harness
• Buckle size adjustment for easy fitting
• Soft foam sweat band included
• 7 years shelf life from manufacturing date outlined in product user sheet
• Compatible with HF100, HF101, HF102, HR100

Honeywell Clearways browguard offers both strength and durability with economical replacement visors available in acetate or polycarbonate. Strong and durable construction. Excellent comfort over long periods of use due to its lightweight design.

Compatible with visor SHF021

ABS dual shell safety helmet with PC retractable visor. Sport and dynamic design. 3 textile straps with 6 fixing points. Foam sweat band. One-D Rotor clamping system: head size 53 to 63 cm. 2 possible positions of the headband (top/low) for a better comfort. Retro-reflective stickers. Electrical insulation up to 1 000 V.A.C. or 1 500 V.D.C, protection against arc fault Class 1 (GS-ET 29). Visor with anti-Fog N and anti-scratch K treatments and protection against electrical arcs, and molten metals or hot liquids projections.
ABS Dual-Shell.
Polycarbonate visor.


EN397:2012 + A1:2012 Protective helmets for industry  

MM Molten metal spray
LD Lateral deformation
-20°C +50°C Use : Very low temperature - -20°C / +50°C
440VAC Electric insulation
Electrically insulating helmets for use on low voltage installations
EN50365:2002 Electrically insulating helmets for use on low voltage installations  

CLASS 0 Electrically insulating helmets - Class 0
EN166:2001 Personal eye-protection - Specifications  

1 AT 8-1-0 9 KN Oculars
3 8-1 9 AT Frame
EN170:2002 Ultraviolet filters  

2C-1.2 echelon
Additional requirements electric arc protection.
GS-ET 29:2011-05 Additional requirements electric arc protection.  

8-1-0 Oculars
CLASS 1 Class
CLASS 0 Light transmittance class = Class 1 : (50% ≤ VLT(D65) < 75%) / Class 0 : (VLT(D65) ≥ 75%).
8-1 Frame

The FirstBase 3 bump cap range is designed to provide protection against the effects of striking the head against hard, stationary objects which can cause lacerations or other superficial injuries. Bump caps are not intended to provide protection against the effects of falling or thrown objects or suspended loads and does not offer the same protection level as an industrial safety helmet as specified in EN397.

Typical applications and environments that utilise baseball style bump protection include manufacture and maintenance in the aerospace, automotive and facilities maintenance sectors, transportation and logistics workers, tradesmen working in environments without the risk of falling objects and government institutions such as the Police.

In Case of Emergency (ICE) stickers for accident victims gives on-site instant access to victims potential lifesaving information and enables emergency contacts be quickly notified of the situation 24/7.

Information is held securely ? Water resistant holder with waterproof paper ? Write on both sides to include more information ? Hi-Vis reflective ID holder for easy recognition ? Instant access to potentially life saving information

Hardcap™ A1+ Bump Cap
The new HardCap™ A1+ is another major innovation from JSP in head protection design. Designed to exceed the most recent standards, EN812:2012, years of thought and design iterations have been undertaken to develop a product that is unrivalled in both performance and style. Sleek and low profile, it's almost impossible to distinguish from a standard 'high street' baseball cap.

The unique angled adjuster designed to fit under the occipital bone at the rear of the skull means that one size really does fit all, particularly when combined with the castellated protective liner. The liner is removable, therefore the cap part is machine-washable for hygiene purposes. It has a terrytowelling sweatband for added comfort and all colour-ways have subtle reflective piping for added visibility safety.

Reflective Piping
Reflective piping on all models adds extra visibility and therefore safety in all working environments.

Ventilation
Extra holes in the liner plus the two mesh panels on the outer mean added ventilation for coolness and comfort.

Unique Adjuster
Unique one-handed angled adjuster to quickly fit, giving true one size fits all. Sizing ranges from 53cm to 63cm headsize.

All Round Protection
The protective liner is removable, so the outer cap is fully washable for hygiene purposes and extended life cycle.

Sweat Band
Terry towelling sweatband adds comfort and absorption for the wearer.

• General features

• multifunctional helmet for working at heights and rescue operations
• combination of features from the industrial protection helmet (EN 397) with the requirements for a climbing helmet (EN 12492)
• safety helmet with slot on the front for helmet lights
• side Euroslot adapters (30 mm) for attaching earmuffs or the uvex pheos visor system
• options for attaching head torches, goggles and face protection
• available in: white, yellow, orange, red, green, blue, black

Comfort features

six-point textile band attachment ensures optimal fit and great comfort suspension harness with wheel ratchet for variable width adjustment delivered as standard with a black PU sweatband (art. no. 9760.009); there is also an option of a light sweatband made of synthetic leather (art. no. 9760.005)

Protection features

meets standard EN 397 and additional requirement for very low temperatures (-30 °C) firmly riveted four-point chin strap for use in accordance with EN 12492 chin strap included (art. no. 9790.005) for use in accordance with EN 397 light ABS helmet shell offers high level of protection and durability

Modern style bump cap in Hi-Visibility colours. Mesh panel on the back which, together with the ventilation holes on the internal shell, help cooling comfort. Hook and loop adjustable size.

Features

• CE certified
• Long peak (7cm) for maximum protection against shock and light
• Hi-Visibility colour for visibility in daylight
• Durable high density EVA protects and gives comfort to the wearer
• Retail bag which aids presentation for retail sales
• Inner ABS shell and soft pad for shock absorption

Comfortable replacement sweatband with 2mm foam.

• Black brushed Nylon, soft to the skin, laminated to 2mm foam

The forestry unit from JSP is designed for maximum comfort and optimum protection for users where head protection (safety helmets) is not mandatory.
Designed in-house by our Research and Development Department, the Bushmaster™ combines the high protection factor ear defenders, JSP Classic Extreme, with a wire mesh visor.

Ear Defender SNR=30 Ear-Defender conforms to EN 352-1 SNR 30. Visor conforms to EN1731