PPE

ORP-6293 - PowerCap® Infinity® / Jetstream® - Visor Seal

£24.38

Code: SHA241

Replacement visor seal for the PowerCap® Infinity® & Jetstream®.

Availability: Available in 3-10 days

Minimum quantity for "ORP-6293 - PowerCap® Infinity® / Jetstream® - Visor Seal" is 5.

ORP-6240 - 3M 8822 P2 Valved Respirator Bx10

£30.13

Code: SHA011

The 3M 8822 P2 Valved dust/mist respirator protects you when exposed to fine respirable dusts, fibres and water/oil mists. The mask reduces heat build up with it's 3M cool flow valve, making it suitable for working in humid and hot conditions. The design of this lightweight respirator mask means it can comfortably fit a great variety of facial shapes and sizes. The twin straps are made of natural rubber and materials used in the mask includes a steel nose clip and polyurethane nose foam. This item weighs 13 grams.

Availability: In stock

ORP-6200 - PowerCap® Infinity® / Jetstream® - Peel off visor protectors (Pack of 10)

£28.54

Code: SHA248

Protect your PowerCap® Infinity® & Jetstream® visor with these peel off visor protectors. Regularly using and replacing these will help prolong the life the units

Availability: Available in 3-10 days

ORP-6148 - Adflo Particle Filter PSL [Pk 2]

£97.40

Code: SHA143

Replace when you Adflo particle filter indicator becomes red. Otherwise, replace whenever the battery operating time becomes too short, or when ”fully loaded” filter triggers low airflow alarm.
Simple to install.
For maximum safety and comfort, make it a habit to check your equipment regularly. Replace worn out or damaged parts.

Availability: Available in 3-10 days

Minimum quantity for "ORP-6148 - Adflo Particle Filter PSL [Pk 2]" is 1.

ORP-6148 - 3M™ Adflo™ Particle Filter P SL [PK of 2]

£114.72

Code: SHA236

Replacement particle filter P SL for 3M™ Adflo™ Powered Air Respirator
Simple to install and must always be used to maintain service life of your respirator
Replace when particle filter indicator becomes red, when the battery operating time becomes too short or when "fully loaded" filter triggers low airflow alarm
To increase service life, make it a habit to check your equipment regularly
2 per pack

3M™ Adflo Particle Filter, 837012, is designed to replace worn or damaged particle filters in 3M™ Adflo™ Powered Air Respirator. There are two in each pack.

Ensure optimum performance from your 3M™ Adflo™ Powered Air Respirator, with 3M™ Adflo Particle Filter, 837012. Our replacement particle filter is simple to install and must always be used. It should be replaced when the particle filter indicator becomes red, the battery operating time becomes too short or when a "fully loaded" filter triggers a low airflow alarm. There are two in each pack. To increase service life, make it a habit to check your equipment regularly.

Availability: Available in 3-10 days

ORP-6146 - 3M™ Adflo™ Prefilter [PK of 5]

£25.31

Code: SHA235

Regular replacement of the Adflo™ pre-filter extends the life of the particle filter, saving money while also increasing the battery run-time
Inspect your pre-filter regularly for any damage, clogging or breakthrough
Do not attempt to clean the pre-filter
For use with the 3M™ Adflo™ Powered Air Respirator
5 per pack

3M™ Adflo™ Prefilter, 836010, is a replacement prefilter designed for use with 3M™ Adflo™ Powered Air Respirator. There are 5 in each pack.

Increase the battery run-time and reduce operating costs when using 3M™ Adflo™ Powered Air Respirator with 3M™ Adflo™ Prefilter, 836010. Our prefilter captures large particles that may otherwise clog the particle filter, reducing operating costs by extending its life. It can also increase battery life efficiency. It comes as a pack of five and must be installed and used according to the user instructions. To increase service life, make it a habit to check your equipment regularly.

Availability: Available in 3-10 days

Minimum quantity for "ORP-6146 - 3M™ Adflo™ Prefilter [PK of 5]" is 2.

ORP-6057 - 3M 9332+ FFP3 Valved Disposable Respirator [Bx 10]

£79.47

Code: HA443

The 3M™ Aura™ Disposable Respirator 9332+ provides comfort and style without compromising performance. Protects against dusts and mists found in a wide variety of industrial applications and other work situations requiring FFP3 protection.

Get FFP3 protection against dusts, mists and metal fumes in a wide variety of industrial applications and other hazardous environments, with 3M™ Aura™ Particulate Respirator 9332+. The ingenious 3 panel design allows for greater facial movement, while the sculpted, low profile style of the embossed upper panel creates an effective seal, reduces eyewear fogging and improves eyewear compatibility.

It features the 3M™ Cool Flow™ Valve that helps reduce heat build-up in hot and humid conditions, and the low resistance filter technology helps you breathe easily. The flat fold design makes it convenient to store when not in use, and the innovative chin tab allows you to make simple adjustments. The braided, colour coded headbands help you identify the protection level offered: red for FFP3 (NPF 50).

This respirator is individually packed in hygienic wrapping to protect against contamination, and it’s designed to work well with 3M Eyewear and Hearing Protection products.

Features and Benefits

Flat fold disposable FFP3 respirator offering reliable, effective protection against higher levels of fine dust, mists and metal fume

Low breathing resistance filter technology for easier breathing through your shift

Ingenious 3-panel design that accommodates greater facial movement during speech so much more comfortable to wear

An embossed top panel to reduce fogging of eyewear

Headbands are coloured for easy identification: red for FFP3

An innovative chin tab for ease of donning and adjustment of the respirator on the face

Supplied in hygienic packaging to help protect the respirator from contamination before use, also allows practical storage and dispensing in the workplace.

Sculpted nose panel helps conform to the nose and contours of the face and helps to improve compatibility with 3M eyewear

Availability: In stock

ORP-6026 - Powercap® Infinity® PAPR - PowerBox2™ Battery Pack

£310.62

Code: SHA243

PowerBox2™ Battery Pack for the PowerCap® Infinity®.

Availability: Available in 3-10 days

ORP-6025 - 3M™ Versaflo™ TR-619 Powered Air Turbo Starter Kit

£1,431.59

Code: SHA220

Details

Powered air turbo kit that keeps workers comfortable and protected for their work day
Multiple airflow rate options for user comfort
Ergonomically designed to fit close to the body and allow for greater movement in tight work spaces
Multiple belt size adjustments for proper fit and comfort
Belt designed with flexible air channels to minimise heat buildup

With user-selectable airflow rates, rugged construction and a comfortable design that will see you through the entire shift, the 3M™ Versaflo™ Powered Air Turbo TR-600 helps provide durable protection in harsh environments. The kit includes the TR-602UK Turbo, A2P filter, filter cover, prefilters (x10), spark arrestor (x2), easy clean belt, high capacity battery, single station battery charger kit, BT-30 length adjusting breathing tube and airflow indicator

Availability: Available in 3-10 days

ORP-6024 - Elipse P3 Replacement Filter Kit

£13.12

Code: HA052

Elipse

Replacement P3 filters for the Elipse mask.

Availability: In stock

ORP-6018 - JSP Force8 PressToCheck ABEK1P3 Filter [PAIR]

£32.61

Code: SHA098

JSP Force8 PressToCheck ABEK1P3 Filter

Availability: In stock

Minimum quantity for "ORP-6018 - JSP Force8 PressToCheck ABEK1P3 Filter [PAIR]" is 20.

ORP-60051 - PowerCap® Infinity® PAPR - Twin-Turbo Drive Unit and Visor Carrier Assembly

£963.61

Code: SHA252

Replacement drive unit and visor carrier assembly for the PowerCap® Infinity®. The Patented Twin-Turbo drive unit controls the movement of air within the respirator delivering a minimum of 160 litres a minute of filtered clean air.

Availability: Available in 3-10 days

ORP-60049 - Sundstrom SR221 Pre Filter [Pack of 5]

£3.21

Code: SHA246

Prefilter SR 221 is a disc that is meant to catch coarse particles and by that extend the lifetime of the particle filters SR 510 P3 R and SR 710 P3 R, combined filter SR 299-2 ABEK1-Hg-P3 R and SR 599 A1BE2K1-Hg-P3 R. The prefilter is placed in the prefilter holder and then snapped on to the particle filter or combined filter.

Availability: In stock

ORP-60048 - Sundstrom SR510 P3 Filter [Single]

£13.30

Code: SHA245

The SR 510, P3 R* particle filter is designed for use in Sundström half masks, full face masks and the SR 500/ SR 500 EX/SR 700 fan. The filter provides protection against all types of particulate pollutants. The particle filter can easily be combined with gas filters from the Sundström filter range in order to provide protection also against gases and vapours, e.g. during spray painting. The particle filter should be combined with pre-filter SR 221, which will thereby extend the life of the particle filter. The SR 500/SR 500 EX fan should always be used with two particle filters or two combined filters consisting of gas filters and particle filters. *R (Re-useable): The filter is intended to be used for more than a single shift.

Availability: In stock

ORP-60046 - 3M 6035 P3 Filters [10pr]

£121.36

Code: SHA063

3M 6035 P3 Filters

Availability: Available in 3-10 days

ORP-60019 - Moldex 3205 M/L FFP3 Valved Mask Bx10

£82.75

Code: HA330

?   FFP3 protection against harmful and carcinogenic dusts, fumes and water/oil based mists/aerosols 20 x WEL (Workplace Exposure Limit).
?   Long Expiry
?   Air series 3205 valved FFP3 mask offers extremely low breathing resistance and therefore increase performance of both mask and wearer.
?   The filtering surface of the 3205 FFP3 mask is almost 3 times larger than a standard filter product allowing you to breathe more easily
?   Special Ventax Valve reduces heat and moisture instead the mask for increased comfort
?   Activform seal automatically adjusts the FFP3 mask to different face shapes
?   Produced with Moldex DuraMesh material for a durable, strong structure that lasts
?   The Strap and clip allows you to hang the mask around the neck during breaks.
?   EN Classification 149:2001 + A1:2009 FFP3 NR D

Availability: Available in 3-10 days

Minimum quantity for "ORP-60019 - Moldex 3205 M/L FFP3 Valved Mask Bx10" is 6.

ORP-60018 - Alpha Solway 3030V FFP3 Valved Disposable Respirator Bx5

£30.76

Code: HA323

Betafit

High quality disposable respiators offering exceptional comfort and protection. Low breathing resistance due to the lastest in fiter medium technology. Comforable soft faceseal. Preformed nosebridge ensures a consistent fit. Simple comfort head harness. No metal components. Formed outer shell helps maintain shape even in high humidity areas. Soft face seal ring and fully adjustable straps giving even greater levels of comfort and protection. With exhalation valve.

Availability: In stock

ORP-60017 - Honeywell North® PA700 ABEK1P Cartridge [Box of 4]

£433.47

Code: HA194

Availability: In stock

Onyx Class 1 ARC Flash Helmet & Visor

£150.53

Code: HP070P

Electric Arc Protection, ProGARM

ABS dual shell safety helmet with PC retractable visor. Sport and dynamic design. 3 textile straps with 6 fixing points. Foam sweat band. One-D Rotor clamping system: head size 53 to 63 cm. 2 possible positions of the headband (top/low) for a better comfort. Retro-reflective stickers. Electrical insulation up to 1 000 V.A.C. or 1 500 V.D.C, protection against arc fault Class 1 (GS-ET 29). Visor with anti-Fog N and anti-scratch K treatments and protection against electrical arcs, and molten metals or hot liquids projections.
ABS Dual-Shell.
Polycarbonate visor.

EN397:2012 + A1:2012 Protective helmets for industry

MM Molten metal spray
LD Lateral deformation
-20°C +50°C Use : Very low temperature - -20°C / +50°C
440VAC Electric insulation
Electrically insulating helmets for use on low voltage installations
EN50365:2002 Electrically insulating helmets for use on low voltage installations

CLASS 0 Electrically insulating helmets - Class 0
EN166:2001 Personal eye-protection - Specifications

1 AT 8-1-0 9 KN Oculars
3 8-1 9 AT Frame
EN170:2002 Ultraviolet filters

2C-1.2 echelon
Additional requirements electric arc protection.
GS-ET 29:2011-05 Additional requirements electric arc protection.

8-1-0 Oculars
CLASS 1 Class
CLASS 0 Light transmittance class = Class 1 : (50% ≤ VLT(D65) < 75%) / Class 0 : (VLT(D65) ≥ 75%).
8-1 Frame

Availability: In stock

OHP-6939 - Moldex MelLows® Ear Plugs SNR22 [Box 200]

£32.43

Code: HR457

• 22SNR
• Earplugs for protection against lower noise levels
• Made of soft PU-foam
• Packed in pairs
• 200 pairs per box
• Tested and certified to EN 352-2:2002

Availability: Available in 3-10 days

OHP-6793 - Laser Lite Corded Ear Plugs Bx100

£38.77

Code: HR513

Betafit

SNR 35. Packed in corded pairs, individually wrapped sealed hygiene packet. Vibrant colours make protection visible Self adjusting foam expands to fit virtually any wearer. Contoured T shape facilitates easy insertion.

Availability: In stock

OHP-6581 - Helmet Mounted Earmuff SNR 26

£9.32

Code: HR351

SNR26. Fits safety helmets with 30mm slot fixing. Fully adjustable and can be folded up onto the safety helmet when not in use.

Availability: In stock

OHP-6505 - Peltor Optime 3 Helmet Earmuff

£41.60

Code: SHR759

The 3M™ Peltor™ Optime™ III is a high performance hearing protector and has been developed for use in extremely noise environments. The protection is based on a technology with a double casing minimising resonance in the holder casing, maximising high-frequency attenuation. An acoustic connection between the inner volume and the volume between the casings in its turn provides low-frequency attenuation
The 3M™ Peltor™ Optime™ III sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure, the earmuff stands for effective protection and highest comfort for the wearer. The product is also available in a dielectric version without visible metal parts and in High Viz green for workers who need hearing protection and be extra visible

Availability: Available in 3-10 days

OHP-6411 - Betafit Foam Earplug Dispenser Pack 500prs

£84.69

Code: HR524

Betafit

Packed in a robust refillable dispenser, easy vision and hygienic with simple one handed twist to dispense operation.

Availability: Available in 3-10 days

OHP-6361 - Betafit Eiger Goggles

£8.53

Code: HE225

Betafit

Very comfortable ski style goggle with soft face seal and contour fit. Anti-Scratch and Anti-Mist lens. Class 1 optical clarity. Adjustable comfort headstrap.

Availability: In stock

OHP-6231 - 3M™ PELTOR™ Optime™ III Ear Muffs

£35.32

Code: HR721

3M™ PELTOR™ Optime™ III Ear Muffs

Availability: In stock

OHP-6228 - Pink Rocket Earplug

£88.38

Code: HR554

Moldex

Very comfortable corded ear plug made in dual materiel for easy insertion. Packed in transportable pocket pack for protection. SNR 30

Availability: Available in 3-10 days

OHP-6224 - Uvex Whisper Corded Ear Plugs [50 Pairs]

£73.03

Code: HR556

With a smooth, dirt-repellent surface, provides high wearing comfort and is easy to clean with soap and water. With the cord the earplug is conveniently to hand, making it a readily available hearing protection or they can be removed and worn around the neck. Cord can also be removed.

Availability: Available in 3-10 days

OHP-6220 - Sonis® 1 Ear Defenders - SNR 27

£18.74

Code: HR101

The Sonis® range of ear defenders have been designed by the JSP R&D team. Working with a leading UK acoustic engineering research facility they have developed an ear defender range that peaks at an unbeaten 37 SNR.

Features & Benefits

SNR 27
Low attenuation small cup 80-107 DB
Moderate industrial noise
Workshops
Printing works
Landscaping
Leisure activities
Hygienic
Customisation
Colour Coding for easy selection

Availability: In stock

OHP-6218 - Sonis® 2 Ear Defenders - SNR 31

£20.26

Code: HR102

The Sonis® range of ear defenders have been designed by the JSP R&D team. Working with a leading UK acoustic engineering research facility they have developed an ear defender range that peaks at an unbeaten 37 SNR.

Features & Benefits

SNR 31
Medium attenuation medium cup 107-111 DB
Substantial industrial noise
Roadworks
Printing works
Forestry
Engineering
Hygienic
Customisation
Colour Coding for easy selection

Availability: In stock

OHP-6217 - Moldex M5 Overhead Earmuff SNR34

£24.32

Code: HR360

Moldex

High quality, robust Ear Muff. High attenuation at 34 dB [SNR]. Light and flexible, with low contact pressure. Comfort cushions made from viscoelastic foam. Ribbed air cushions for cool comfort. Plain surface for easy cleaning. Replaceable foam inserts [Part

Availability: In stock

OHP-6216 - Sonis® 3 Ear Defenders - SNR 37

£28.79

Code: HR103

The Sonis® range of ear defenders have been designed by the JSP R&D team. Working with a leading UK acoustic engineering research facility they have developed an ear defender range that peaks at an unbeaten 37 SNR.

Features & Benefits

SNR 37
High attenuation large cup 112-117dB
Extreme industrial noise
Aircraft
Quarrying
Paper mills
Heavy engineering
Hygienic
Customisation
Colour Coding for easy selection

Availability: Available in 3-10 days

Minimum quantity for "OHP-6216 - Sonis® 3 Ear Defenders - SNR 37" is 10.

T: 0800 122 33 23

PPE

Features and Benefits

Recently Viewed

General

Customer Services

Account Info

Sign up to our news and offers:

T: 0800 122 33 23

PPE

PPE

Features and Benefits

Recently Viewed

General

Customer Services

Account Info

Sign up to our news and offers:

Get social