Highly breathable three-flap flat design filtering masks.

3-FLAP FLAT DESIGN
Thanks to the three-flap design, the device adapts perfectly to all facial movements, ensuring maximum protection and efficiency at all times. The folded lower flap allows easy opening of the facepiece without contaminating the inside.

INTERNAL NOSE CLIP
The nose clip, placed internally between the layers of filtering material, adapts optimally to the profile of the nose and eyes, ensuring good visibility and maximum compatibility with glasses.

TEXTILE ELASTICS
The elastic bands are made of enduring and high-performance textile material. The addition of a backing layer allows the elastics to adhere to the filter body without the use of exposed metal parts.

Armor® layer
It is an external protective layer that ensures the protection of the filtering material from dirt, dust and liquids as well as the normal mechanical stress due to prolonged use thus extending and preserving filtering efficiency and making the device safer.

RIGID INNER CORE
The addition of the innovative inner core ensures solidity to the filtering facepiece and high breathing performance.

High breathability
The filter material has a water vapour transmission ratio (amount of vapour able to pass through it) of 3380 g/m². This value is much higher than that of the vast majority of our competitors. Tests performed according to ASTM E96/E96M.

AVAILABLE IN TWO SIZES
This series is available in two different sizes, S and M/L, to perfectly fit all face types. The S size was specifically designed for female faces.

EOLO® EXHALATION VALVE
An ultralight membrane concentrates the exhaled air into two zones of maximum aperture, 30% wider than before. With these improvements breathing resistance decreases significantly.

AVAILABLE WITH ACTIVATED CARBON (soon available)
An activated carbon layer may be added to the respirator to protect from nuisance odours caused by gases and vapours, both organic and acidic, including ozone (ideal for welding operations), in concentrations below the threshold limit value (TLV).

OPTIMAL VISUAL FIELD
The shape of the filtering facepiece guarantees a large filtering surface area, leaving the field of vision totally free.

Single packed
The single hygienic package protects the filtering facepiece from any contamination before use, allowing it to be stored in a practical way and distributed in the work environment.

• For use with 3M™ TR-300 Series Powered Air Respirators
• Particulate filter and nuisance odour options
• Individually packaged
• Simple to install

3M™ Versaflo™ TR-300 Series Powered Air Respirator Filters are designed for use with 3M™ TR-300+ Series Powered Air Respirators.

Different tasks require different protection. Particulate filters help protect against particles such as dust and debris. Filters are easy to connect to the 3M™ Versaflo™ Powered Air Respirator, TR-302E+ features an audible and visual alarm to let you know when to replace your filter.

The SR 100 half mask is an Air Purifying Respirator (APR) made of silicone in three sizes, i.e. S/M, M/L and L/XL. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA and BGA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The mask is used either as an APR in combination with filters and/or cartridges from the Sundström range, or in combination with the SR 307 compressed air attachment, this combination is called a Type C Continuous Flow Supplied Air Respirator (SAR). A pre-filter holder for simple checking of the performance are supplied. Best stored in box SR 230 or storage case SR 339.

• TR-3712E - Particulate (P) filter for protection against dusts, mists, fumes and other particulate hazards
• TR-3802E - Particulate (P) filter for protection against dusts, mists, fumes and other particulate hazards + nuisance level Organic Vapours (concentrations below the occupational exposure limit)
• TR-3822E - Particulate (P) filter for protection against dusts, mists, fumes and other particulate hazards + nuisance level Acid Gases (concentrations below the occupational exposure limit). Protection against Hydrogen Fluoride up to 10 x Threshold Limit Value
• CE approved to EN 12941 (TH2 or TH3 depending upon headtop combination)
• For use 3M™ TR-300+ Powered Air Respirator

3M™ Versaflo™ Powered Air Respirator Filters, TR-300+ Series provide protection against dusts, mists and other particulate hazards when use with 3M™ Versaflo Powered Air Respirator, TR-300 Series and a 3M™ approved headtop.

Get protection against dust, mist and fumes, and nuisance acid gases or organic vapours with 3M™ Versaflo™ Powered Air Respirator Filters, TR-300+ Series. Our filters are designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-300+ and are CE approved. Certain filters provide protection against nuisance level Organic Vapours or Acid Gases (concentrations below the occupational exposure limit). Filters are easy to connect to the turbo unit and the 3M™ Versaflo™ Powered Air Respirator, TR-302E features an audible and visual alarm to let you know when to replace your filter.

• Charges in under four hours
• Designed for use with 3M™ Versaflo™ Battery, Standard, TR-630 or 3M™ Versaflo™ Battery, High Capacity, TR-632
• Charges up to four batteries at a time
• Store fully-charged batteries on charger, ready for immediate use
• CE approved

TR-644E Battery Charger Kit is a complete 4-station battery charger for use with the 3M™ Versaflo™ Powered Air Turbo TR-600 Series. It consists of four TR-640 Cradles, a Baseplate, Power Supply and Lead.

For charging up to 4 3M™ Versaflo™ Powered Air Turbo TR-600 Series batteries simultaneously, use 3M™ Versaflo™ Battery Charger Kit, TR-644E. Our battery kit will charge four standard batteries (TR-630) or high capacity batteries (TR-632) in less than 4 hours, which can then be stored on the cradle once fully charged, ready for immediate use. The kit includes four charging cradles, a baseplate, power supply and lead.

• Protects 3M™ Versaflo™ TR-6580E filter from physical damage
• Holds a 3M™ Versaflo™ Spark Arrestor, TR-662 or 3M™ Versaflo™ Prefilter, TR-6600 in place for further protection
• Enables 3M™ Versaflo™ Power Air Turbo to be worn through decontamination showers
• Can be cleaned and reused

Filter cover for use with the TR-6580E filter. 3M recommends the use of the filter cover in order to help protect the TR-6580E from physical damage. It is also used to hold the TR-6600 Prefilter or TR-662 Spark Arrestor in place. The TR-6500FC should be replaced when damaged. The filter cover may be cleaned and reused.

Protect 3M™ Versaflo™ TR-6580E filter from physical damage with 3M™ Versaflo™ Filter Cover, TR-6500FC. Our filter cover safeguards your filter and enables you to wear 3M™ Versaflo™ Powered Air Turbo through decontamination showers. It can hold a 3M™ Versaflo™ Spark Arrestor, TR-662 or 3M™ Versaflo™ Prefilter, TR-6600 in place for additional protection from larger particles or sparks. The filter cover can be cleaned for reuse.

• Lightweight, high capacity, lithium-ion battery pack
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 Series
• Charges in under four hours with light-up charge level indicator
• Provides extended duration when compared to TR-630 Standard Battery (when used under equivalent conditions)
• Rinseable and temporarily submergible for easy cleaning
• Easy to see battery charge level
• CE approved

When equipped with a new high capacity battery (TR-632) and new particulate filter (TR-6710E), the system has a run time of 9.5 - 19 hours. System duration will vary based on battery age, filter loading, filter selection and user selected air flow setting. Under equivalent conditions, the TR-632 high capacity battery provides extended system durations when compared to the TR-630 standard battery. The TR-632 will charge in less than 4 hours. See User Instruction for further information on system durations.

For a lightweight, rechargeable and long-lasting lithium-ion battery for 3M™ Versaflo™ Powered Air Turbo TR-600 Series, use 3M™ Versaflo™ Battery, High Capacity, TR-632. A new high capacity battery can provide your turbo system with 9.5-19 hours of use at a standard flow rate when equipped with a new particulate filter (TR-6710E). System duration will vary based on battery age, filter loading, filter selection and user selected airflow setting. Under equivalent conditions, the TR-632 high capacity battery provides extended system durations when compared to the TR-630 standard battery. This battery back charges in less than four hours and features a light-up charge level indicator. It’s practical and can be rinsed or temporarily submerged in water for easy cleaning. See User Instructions for further information.

Protect your PowerCap® Infinity® & Jetstream® visor with these peel off visor protectors. Regularly using and replacing these will help prolong the life the units

Replacement visor for the PowerCap® Infinity® & Jetstream®. The visor provides Grade B impact protection meeting the requirements of EN 166 against high speed particles.

• high performance filtration of gas and particles beyond CE requirements: for longer and
excellent filtration effectiveness.
• Specific cartridge structure: for better lower breathing resistance and user comfort.
• adapted design: clearing the field of view.
• individually wrapped: for better protection.
• Safety covers: for storage of filters of up to six months.

Housing Aluminium
Connection system RD40
Protection Particles and/or gas/vapour

Standards EN 14387, EN 143

PowerBox2™ Battery Pack for the PowerCap® Infinity®.

Replacement visor seal for the PowerCap® Infinity® & Jetstream®.

Pre-filters and Pre-filter covers for the PowerCap® Infinity®

Replacement pack of hoods for Primair-VL

LIGHTWEIGHT AND EASY TO USE • Wide field of view • Adjustable headband • Replaceable upper elements • Reusable headband and tubes to reduce costs • Air delivery hose to the visor: anti-fog, no cold air directed towards the user’s head • Extremely light semi-disposable hood: The disposable part is Tyvek coated to ensure high chemical resistance • Easy to replace: with two push buttons on the side Areas of application • Laboratories, pharmaceutical, light industries Compatible with: • Honeywell North PA700 PAPR

Cover compatible with A2P and ABEK1 filters, to be purchased when using more than just the P3 filter

• Auto-darkening filter for most types of arc welding
• Designed for 3M™ Speedglas™ Welding Helmet Series 9100
• Variable dark shades 5, 8 and 9 through 13
• Light shade 3
• Viewing area: 54 mm x 107 mm
• Delay function sets the dark-to-light opening time
• Switching time (light-dark) of 0.1 ms
• The sensitivity of arc detection can be adjusted for unsurpassed switching reliability
• Tack welding comfort mode help minimize eye strain during extended tack welding applications

3M™ Speedglas™ Auto-darkening Filter 9100X, 500015 is designed for use with 3M™ Speedglas™ Welding Helmet Series 9100. Our filter features dark shades 5, 8, 9 to 13, a switching time (light-dark) of 0.1 ms, and a viewing area of 54 mm x 107 mm.

For an auto-darkening filter with seven variable dark shades (5, 8 and 9-13) for most types of arc welding, get 3M™ Speedglas™ Auto-darkening Filter 9100X, 500015. It has a viewing area of 54 mm x 107 mm and is made for the professional welder. Our 3M™ Speedglas™ Welding Filter 9100 Series features uniform shading and minimal distortion across the entire filter viewing area. The delay function sets the dark-to-light opening time, and it’s possible to lock-in any shade, e.g. in light state 3 when grinding. It has a switching time (light-dark) of 0.1 ms, and the sensitivity of the arc detection can be adjusted for reliable switching. Tack welding comfort mode also helps minimise eye strain during extended tack welding applications.

• Ensures your 3M™ Adflo™ Powered Air Respirator stays fully-charged, safe and ready to use
• Charges Li-ion batteries
• Replaces worn or damaged chargers
• Increase the service life of your equipment by checking it regularly

3M™ Adflo™ Battery Charger, 833111 replaces worn or damaged parts for 3M™ Adflo™ Powered Air Respirator. Our replacement battery charger is designed for Li-ion batteries.

Keep your respirator equipment fully-charged, safe and ready to use, with 3M™ Adflo™ Battery Charger, 833111. Our spare battery charger is designed to charge the Li-ion batteries in your 3M™ Adflo™ Powered Air Respirator and replaces worn or damaged equipment. Increase the service life of your equipment by checking it regularly.

• Standard Li-ion battery
• Fully charges in 4-5 hours depending on residual capacity
• Operating time between 7 and 9 hours when used with a new particle filter at the standard airflow setting
• For use with 3M™ Adflo™ Powered Air Respirator
• Lightweight and compact for optimum user comfort

3M™ Adflo™ Li-ion Battery, 837630 is our standard battery designed for use with 3M™ Adflo™ Powered Air Respirator.

Ensure your 3M™ Adflo™ Powered Air Respirator is fully operational with 3M™ Adflo™ Li-ion Battery, 837630. Our standard Li-ion battery fully charges in about 4-5 hours depending on residual capacity. When new, the fully-charged battery provides between 7 and 9 hours of operating time when the respirator is used with a new particle filter and a standard airflow setting. Compact and lightweight for optimum user comfort during a full shift.

• Replacement particle filter P SL for 3M™ Adflo™ Powered Air Respirator
• Simple to install and must always be used to maintain service life of your respirator
• Replace when particle filter indicator becomes red, when the battery operating time becomes too short or when "fully loaded" filter triggers low airflow alarm
• To increase service life, make it a habit to check your equipment regularly
• 2 per pack

3M™ Adflo Particle Filter, 837012, is designed to replace worn or damaged particle filters in 3M™ Adflo™ Powered Air Respirator. There are two in each pack.

Ensure optimum performance from your 3M™ Adflo™ Powered Air Respirator, with 3M™ Adflo Particle Filter, 837012. Our replacement particle filter is simple to install and must always be used. It should be replaced when the particle filter indicator becomes red, the battery operating time becomes too short or when a "fully loaded" filter triggers a low airflow alarm. There are two in each pack. To increase service life, make it a habit to check your equipment regularly.

• Regular replacement of the Adflo™ pre-filter extends the life of the particle filter, saving money while also increasing the battery run-time
• Inspect your pre-filter regularly for any damage, clogging or breakthrough
• Do not attempt to clean the pre-filter
• For use with the 3M™ Adflo™ Powered Air Respirator
• 5 per pack

3M™ Adflo™ Prefilter, 836010, is a replacement prefilter designed for use with 3M™ Adflo™ Powered Air Respirator. There are 5 in each pack.

Increase the battery run-time and reduce operating costs when using 3M™ Adflo™ Powered Air Respirator with 3M™ Adflo™ Prefilter, 836010. Our prefilter captures large particles that may otherwise clog the particle filter, reducing operating costs by extending its life. It can also increase battery life efficiency. It comes as a pack of five and must be installed and used according to the user instructions. To increase service life, make it a habit to check your equipment regularly.

• Replaces pitted or scratched outer protection plates for 3M™ Speedglas™ Welding Filter Series 9100 and G5-01.
• Helps protect your welding filter from sparks and welding spatter
• Helps you maintain optimal vision and the correct level of comfort and protection
• Clean with a soft cloth and replace if any pits or scratches occur
• 10 per pack

3M™ Speedglas™ Outer Protection Plate 9100 (heat), 527070 is our extra heat-resistant protection plate for 3M™ Speedglas™ Welding Helmet Series 9100 and G5-01. Available in packs of 10.

Replace your original protection plate if it becomes pitted or scratched, with 3M™ Speedglas™ Outside Protection Plate 9100 (heat), 527070. This plate is extra heat resistant and helps protect you from sparks and spatter. Our outer protection plate replaces worn or damaged parts and ensures you maintain the correct level of comfort and protection. When your orginal plate becomes deeply pitted, scratched or too dirty to clean with a soft cloth, it's probably time to replace it. Make it a habit to check your equipment regularly for maximum comfort and vision. The extra heat-resistant model may extend service life compared to the standard model. Available in packs of 10.

• Prevents sparks from entering the filters of the 3M™ Adflo™ Powered Air Respirator
• Check your spark arrestor regularly and assess for any damage
• Replace immediately if any damage is evident
• To increase service life, make it a habit to check your equipment regularly

3M™ Adflo™ Spark Arrestor, 836000, is a replacement spark arrestor for 3M™ Adflo™ Powered Air Respirator. Our spark arrestor prevents sparks from entering the filter.

Prevent sparks from entering your 3M™ Adflo™ Powered Air Respirator filter with 3M™ Adflo™ Spark Arrestor, 836000. Regularly checking the condition of your 3M™ Adflo™ Powered Air Respirator and examining it for any damage or breakthrough is important in maintaining your health and safety. If any damage is evident, it must be replaced immediately. To increase service life, make it a habit to check your equipment regularly.

• Replacement visor frame kit with silver front panel
• For use with 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP
• Ensures you get the correct level of comfort and protection
• Check your equipment regularly to increase service life

3M™ Speedglas™ Front Cover Kit, 540500 is designed for use with 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP. Our spare part kit replaces worn or damaged visor frame kits.

Ensure you get the optimum level of comfort and protection from your welding helmet with 3M™ Speedglas™ Front Cover Kit, 540500. Our spare part replaces worn or damaged visor frame kits in 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP, and includes the silver front panel. Make it a habit to check your equipment regularly for maximum safety.

• Replaces pitted or scratched anti-fog visor plates
• Specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP
• 5 per pack
• Regularly clean with a soft cloth and replace if pits or scratches occur

3M™ Speedglas™ Visor Plate, 523001 is specially designed for 3M™ Speedglas™ Welding Helmets 9100FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP. Our spare part replaces worn or damaged protective visors (anti-fog) and there are 5 in each pack.

For a replacement anti-fog visor plate, get 3M™ Speedglas™ Visor Plate, 523001. Our spare part replaces worn or damaged visors. Regularly clean with a soft cloth and replace if any pits or scratches occur. They’re specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP, and this is a pack of 5

Honeywell’s respiratory PAPR faceshield with integrated impact resistant visor, enhanced ergonomics and comfort, appealing aesthetics and more user-friendly headgear that is suitable for use in working areas where eye/ear/ face protection could be required. This assembly includes the PA032 breathing tube for the PA900 series used to connect the headgear to the PA500EU series or PA700EU series PAPR of your choice.

Honeywell’s respiratory PAPR faceshield with a hard hat for head protection to EN 397+A1. Features an integrated impact resistant visor, enhanced ergonomics, appealing aesthetics and more user-friendly headgear. Suitable for use in working areas where eyes/face/ears and head protection are required. This assembly includes the PA032 breathing tube for the PA900 series used to connect the headgear to the PA500EU series or PA700EU series PAPR of your choice

2.5 ADF PAPR Welding Helmet

• All-in-one, integrated unit – battery and blower motor contained in compact casing: delivers better safety.
• Side-mounted battery– contained in housing on five (5) sides and locks into place to reduce accidental disconnections.
• Ergonomic belt– distributes weight evenly and prevents slipping: adjustable nylon straps for additional support: optional comfort pad.
• Smart breathing tube connection– twist and lock connector angles tube away from back.
• Efficient keypad– illuminated, easy-to-read display: large buttons for easy operation – even for workers wearing gloves: offers access to adjustable airflow with three speeds: buttons are spaced apart to prevent accidental shut down of the unit when changing airflow speed.
• Filter connection– Locks into place with a quarter turn, assuring workers they are secure.
• Optional filter cover– smooth design is easy to wipe clean: protects filter from impact and during decontamination showers.

Hazards

• Airborne Particulates

Assembly includes connected blower, battery, battery charger, comfort pad, flow meter, and PVC belt

Key Features

• All-in-one, integrated unit – battery and blower motor contained in compact casing: delivers better safety.
• Side-mounted battery– contained in housing on five (5) sides and locks into place to reduce accidental disconnections.
• Ergonomic belt– distributes weight evenly and prevents slipping: adjustable nylon straps for additional support: optional comfort pad.
• Smart breathing tube connection– twist and lock connector angles tube away from back.
• Efficient keypad– illuminated, easy-to-read display: large buttons for easy operation – even for workers wearing gloves: offers access to adjustable airflow with three speeds: buttons are spaced apart to prevent accidental shut down of the unit when changing airflow speed.
• Filter connection– Locks into place with a quarter turn, assuring workers they are secure.
• Optional filter cover– smooth design is easy to wipe clean: protects filter from impact and during decontamination showers.

Hazards

• Airborne Particulates

Assembly includes connected blower, battery, battery charger, comfort pad, flow meter, and nylon belt

Key Features

• All-in-one, integrated unit – battery and blower motor contained in compact casing: delivers better safety.
• Side-mounted battery– contained in housing on five (5) sides and locks into place to reduce accidental disconnections.
• Ergonomic belt– distributes weight evenly and prevents slipping: adjustable nylon straps for additional support: optional comfort pad.
• Smart breathing tube connection– twist and lock connector angles tube away from back.
• Efficient keypad– illuminated, easy-to-read display: large buttons for easy operation – even for workers wearing gloves: offers access to adjustable airflow with three speeds: buttons are spaced apart to prevent accidental shut down of the unit when changing airflow speed.
• Filter connection– Locks into place with a quarter turn, assuring workers they are secure.
• Optional filter cover– smooth design is easy to wipe clean: protects filter from impact and during decontamination showers.

Hazards

• Airborne Particulates

Assembly includes connected blower, battery, battery charger, comfort pad, flow meter, and welding belt

Backpack for HA188, HA189 & HA190

The Honeywell North® Primair™ 500 (PA500) Series PAPR is a new, particulate-only light-weight powered air-purifying respirator, engineered around three core pillars: comfort, ease-of-use and efficiency.

Key Features

COMFORT

• Ultra-slim and lightweight - ideal for long shifts and working in tight spaces
• Well-balanced design reduces back strain and increases freedom of movement
• Removable comfort pad

TOP NOTCH EFFICIENCY

• Advanced over-molding manufacturing and design made for intuitive assembly and disassembly
• Drop-down function replaces need to doff hardhat or earmuff for quick work break

ON THE JOB SAFETY

• Easy cleaning and maintenance
• Both maintain effective seal all shift long
• Both are PPE compatible
• Both maintain good field of view

 Recommended Industries/Use

• Other
• Construction
• Medical
• Steel and Metals
• Welding

Hazards

• Airborne Particulates

Regulations

• EN - 12941:1998 + A1:2003 + A2:2008

KIT CONTAINS:

Assembly includes connected blower, battery, battery charger, comfort pad, P3 starter kit, filter cover, flow meter, and PVC belt

The Honeywell North® Primair™ 500 (PA500) Series PAPR is a new, particulate-only light-weight powered air-purifying respirator, engineered around three core pillars: comfort, ease-of-use and efficiency.

Key Features

COMFORT

• Ultra-slim and lightweight - ideal for long shifts and working in tight spaces
• Well-balanced design reduces back strain and increases freedom of movement
• Removable comfort pad

TOP NOTCH EFFICIENCY

• Advanced over-molding manufacturing and design made for intuitive assembly and disassembly
• Drop-down function replaces need to doff hardhat or earmuff for quick work break

ON THE JOB SAFETY

• Easy cleaning and maintenance
• Both maintain effective seal all shift long
• Both are PPE compatible
• Both maintain good field of view

 Recommended Industries/Use

• Other
• Construction
• Medical
• Steel and Metals
• Welding

Hazards

• Airborne Particulates

Regulations

• EN - 12941:1998 + A1:2003 + A2:2008

KIT CONTAINS:

Assembly includes connected blower, battery, battery charger, comfort pad, P3 starter kit, filter cover, flow meter, and nylon belt

Please check description for full kit contents

Replacement Battery for HA180, HA181 & HA182

Fitted with A1P3 filters for effective organic gas and particle, dust and vapour protection.

3M 6038 P3R (nuisance level organic vapour and acid gas and hydrogen flouride). Encapsulated Particulate Filters.

• Ideal for wet conditions
• Hazard is contained within filter media, protected by plastic case avoiding risk of skin contamination on removal of filter.
• Easy clean surface

Standard: EN143
Approval: CE marked
Maximum use concentration
When used with half masks: 20xWEL• Hydrogen Flouride: 10xWEL
When used with Full face masks: 40xWEL, Hydrogen Flouride up to 30 ppm Below WEL for gases and vapours
•Workplace Exposure Limit

• Special compact vertical fold-flat design
• High performance exhalation valve to reduce heat and provide comfort when used in hot and humid conditions
• Ultrasonic welded head straps
• Individually wrapped inside hygienic polybag
• Adjustable nose bar for improved fit and reduced fogging of glasses
• Foam padding around the nose bridge for additional comfort
• Dolomite optional clogging test (D) to provide more comfortable breathing and longer lasting filtration performance
• Individually packed for vending machines
• Retail box which aids presentation for retail sales
• CE certified
• UKCA marked
• CE-CAT III

5935 P3R Particulate filters for use with 3M? Gas and Vapour Filters. Use in combination with 3M? 6000 Series Gas and Vapour Filters with a 3M? 501 Filter Retainer for combined gas/vapour and particulate protection. Extremely lightweight. Standard: EN143, Approval: CE marked.

The 3M™ Aura™ Disposable Respirator 9332+ provides comfort and style without compromising performance. Protects against dusts and mists found in a wide variety of industrial applications and other work situations requiring FFP3 protection.

Get FFP3 protection against dusts, mists and metal fumes in a wide variety of industrial applications and other hazardous environments, with 3M™ Aura™ Particulate Respirator 9332+. The ingenious 3 panel design allows for greater facial movement, while the sculpted, low profile style of the embossed upper panel creates an effective seal, reduces eyewear fogging and improves eyewear compatibility.

It features the 3M™ Cool Flow™ Valve that helps reduce heat build-up in hot and humid conditions, and the low resistance filter technology helps you breathe easily. The flat fold design makes it convenient to store when not in use, and the innovative chin tab allows you to make simple adjustments. The braided, colour coded headbands help you identify the protection level offered: red for FFP3 (NPF 50).

This respirator is individually packed in hygienic wrapping to protect against contamination, and it’s designed to work well with 3M Eyewear and Hearing Protection products.

Features and Benefits

Flat fold disposable FFP3 respirator offering reliable, effective protection against higher levels of fine dust, mists and metal fume

Low breathing resistance filter technology for easier breathing through your shift

Ingenious 3-panel design that accommodates greater facial movement during speech so much more comfortable to wear

An embossed top panel to reduce fogging of eyewear

Headbands are coloured for easy identification: red for FFP3

An innovative chin tab for ease of donning and adjustment of the respirator on the face

Supplied in hygienic packaging to help protect the respirator from contamination before use, also allows practical storage and dispensing in the workplace.

Sculpted nose panel helps conform to the nose and contours of the face and helps to improve compatibility with 3M eyewear

JSP Force8 PressToCheck ABEK1P3 Filter