• Replaces pitted or scratched inner protection plate for 3M™ Speedglas™ Welding Filters 9100XX, 9100XXi and G5-01
• Plate size: 117 mm x 77 mm
• Protects the inside of surface of the filter from sparks and spatter
• Helps you maintain optimal vision and the correct level of comfort and protection
• Clean with a soft cloth and replace if any pits or scratches occur
• 5 per pack

3M™ Speedglas™ Inner Cover Plate 9100XX, 528025 is our replacement inner protection plate for 3M™ Speedglas™ Welding Filter 9100XX, 9100XXi and G5-01. Available in packs of 5.

Replace your original inner protection plate if it becomes pitted or scratched, with 3M™ Speedglas™ Inner Cover Plate 9100XX, 528025. It protects the inside surface of the filter from sparks and spatter. Our inner protection plate replaces worn or damaged parts and ensures you maintain the correct level of comfort and protection. When your original plate becomes deeply pitted, scratched, or too dirty to clean with a soft cloth, it's time to replace it. Make it a habit to check your equipment regularly for maximum comfort and vision. Available in packs of 5.

• Protects your Speedglas welding filter series 9100 from sparks and spatter
• Scratch resistant
• Replaces worn or damaged original protection plates
• Regularly clean with a soft cloth and replace if any pits or scratches occur
• Failure to use an outside protection plate with the filter voids the warranty if sparks or spatter contaminate the glass

3M™ Speedglas™ Outside Protection Plate 9100 (scratch resistant), 527000 replaces worn or damaged original protection plates. Our spare part protects your welding filter from sparks and spatter..

Protect your Speedglas welding filter series 9100 from sparks and spatter with the scratch resistant 3M™ Speedglas™ Outside Protection Plate 9100, 527000. Our extra scratch-resistant spare part replaces your original protection plate if it becomes worn or damaged. Regularly clean with a soft cloth and replace if any pits or scratches occur. Failure to use an outside protection plate with the filter voids the warranty if sparks or spatter contaminate the glass. 

Replacement Hinge Mechanism for 3M™ Speedglas™ Welding Helmet 9100 FX/ FX Air

• Replaces worn or damaged air deflectors
• For use with 3M™ Speedglas™ Welding Helmet 9100 FX-Air
• Ensures you get the correct level of comfort and protection
• Check your equipment regularly to increase service life

Pre-filters and Pre-filter covers for the PowerCap® Infinity®

Details

• Pre-filter designed for use with 3M™ Versaflo™ Powered Air Respirator TR-300+
• Captures large particles that would otherwise clog the filter
• Can help to extend the filter life of your powered air respirator

The 3M™ Versaflo™ Pre Filter TR-3600 for use with the 3M™ Versaflo™ Powered Air Respirator TR-300. A Pre Filter can extend the life of the Powered Air Respirator by capturing large particles that would otherwise clog the filter. 10 filters per pack

Capture large particles that would otherwise quickly clog filters with 3M™ Versaflo™ Pre-Filter, TR-3600. Our pre-filter can potentially extend the life of your filter used with the 3M™ Versaflo™ Powered Air Respirator TR-300+ by preventing bigger objects from blocking the filter media

Prefilter can extend the service life of your Adflo particle filter by capturing large particles that may otherwise clog the filter
The prefilter must be installed and used according to the User Instructions
May reduce operating costs by extending the life of the filters

• Hygienic replacement part for your welding helmet
• Fleecy cotton material
• For hygiene purposes our sweatbands are typically for replaced once a month or more
• Helps ensure you get the correct level of comfort and protection
• For use with 3M™ Speedglas™ Welding Helmet 9100, 9100FX and 9100-Air
• 3 per pack

Replacement visor seal for the PowerCap® Infinity® & Jetstream®.

Replacement spare part to the original protection plate if any pits or scratches occur.
For maximum safety and comfort, make it a habit to check your equipment regularly. Replace worn out or damaged parts.
Regularly clean with a soft cloth and replace if any pits or scratches occur.
Approx. size 117mm x 77mm

Protect your PowerCap® Infinity® & Jetstream® visor with these peel off visor protectors. Regularly using and replacing these will help prolong the life the units

• Replacement visor frame kit with silver front panel
• For use with 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP
• Ensures you get the correct level of comfort and protection
• Check your equipment regularly to increase service life

3M™ Speedglas™ Front Cover Kit, 540500 is designed for use with 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP. Our spare part kit replaces worn or damaged visor frame kits.

Ensure you get the optimum level of comfort and protection from your welding helmet with 3M™ Speedglas™ Front Cover Kit, 540500. Our spare part replaces worn or damaged visor frame kits in 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP, and includes the silver front panel. Make it a habit to check your equipment regularly for maximum safety.

EPDM Rubber hose to be used with Scott Proflow/Tornado respiratory systems

• Helps protect you from molten metal, sparks and flames while you weld
• Made from flame-retardant textiles
• Cotton/para-aramid material
• This product is the regular version that comes standard with the 3M™ Speedglas™ Welding Helmets 9100 FX and 9100 FX-Air

• Replaces pitted or scratched outer protection plates for 3M™ Speedglas™ Welding Filter Series 9100 and G5-01.
• Helps protect your welding filter from sparks and welding spatter
• Helps you maintain optimal vision and the correct level of comfort and protection
• Clean with a soft cloth and replace if any pits or scratches occur
• 10 per pack

3M™ Speedglas™ Outer Protection Plate 9100 (heat), 527070 is our extra heat-resistant protection plate for 3M™ Speedglas™ Welding Helmet Series 9100 and G5-01. Available in packs of 10.

Replace your original protection plate if it becomes pitted or scratched, with 3M™ Speedglas™ Outside Protection Plate 9100 (heat), 527070. This plate is extra heat resistant and helps protect you from sparks and spatter. Our outer protection plate replaces worn or damaged parts and ensures you maintain the correct level of comfort and protection. When your orginal plate becomes deeply pitted, scratched or too dirty to clean with a soft cloth, it's probably time to replace it. Make it a habit to check your equipment regularly for maximum comfort and vision. The extra heat-resistant model may extend service life compared to the standard model. Available in packs of 10.

• Replaces worn, damaged or unhygienic face seals
• For use with 3M™ Speedglas™ Welding Helmet 9100 FX-Air
• Ensures you get the correct level of comfort and protection
• Make it a habit to check your equipment regularly for maximum safety

Replacement visor for the PowerCap® Infinity® & Jetstream®. The visor provides Grade B impact protection meeting the requirements of EN 166 against high speed particles.

Details

• Provides respiratory protection against organic gases and vapours with boiling points > 65 °C and particulates
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series
• Simple to install
• 3M recommends using filter cover TR-6300FC to protect the filter from physical damage
• CE approved

A2P filter for use with the 3M™ Versaflo™ Powered Air Turbo TR-600 Series. The filter attaches directly to the turbo. 3M recommends the use of the TR-6300FC filter cover to help protect the filter from physical damage. The TR-6300FC filter cover is also used to hold the TR-6600 prefilter or TR-662 spark arrestor in place.

Get effective respiratory protection against particulates, and organic gases and vapours with boiling points > 65 °C with 3M™ Versaflo™ A2P Filter, TR-6310E. Our filter is designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It’s quick and simple to install and can be protected from physical damage using filter cover TR-6300FC. The filter cover can also be used to hold the prefilter TR-6600 or spark arrestor TR-662 in place for further protection

Replace when you Adflo particle filter indicator becomes red. Otherwise, replace whenever the battery operating time becomes too short, or when ”fully loaded” filter triggers low airflow alarm.
Simple to install.
For maximum safety and comfort, make it a habit to check your equipment regularly. Replace worn out or damaged parts.

• Replaces pitted or scratched anti-fog visor plates
• Specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP
• 5 per pack
• Regularly clean with a soft cloth and replace if pits or scratches occur

3M™ Speedglas™ Visor Plate, 523001 is specially designed for 3M™ Speedglas™ Welding Helmets 9100FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP. Our spare part replaces worn or damaged protective visors (anti-fog) and there are 5 in each pack.

For a replacement anti-fog visor plate, get 3M™ Speedglas™ Visor Plate, 523001. Our spare part replaces worn or damaged visors. Regularly clean with a soft cloth and replace if any pits or scratches occur. They’re specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP, and this is a pack of 5

Details

• Provides respiratory protection against organic gases and vapours with boiling points > 65°C, inorganic and acid gases, ammonia, mercury vapour and particulates
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series
• Simple to install
• 3M recommends using filter cover TR-6300FC to protect ABE2K1HgP filter from physical damage
• CE approved

ABE2K1HgP filter for use with the 3M™ Versaflo™ Powered Air Turbo TR-600 Series. The filter attaches directly to the turbo.

Get effective respiratory protection against a range of hazards with 3M™ Versaflo™ ABE2K1HgP Filter, TR-6580E. Designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series, our filter protects against organic gases and vapours with boiling points > 65°C, inorganic and acid gases and ammonia. It also protects against mercury vapour and particulates. It’s quick and simple to install directly onto the turbo unit and can be protected from physical damage using the filter cover TR-6500FC.

• Prevents sparks from entering the filters of the 3M™ Adflo™ Powered Air Respirator
• Check your spark arrestor regularly and assess for any damage
• Replace immediately if any damage is evident
• To increase service life, make it a habit to check your equipment regularly

3M™ Adflo™ Spark Arrestor, 836000, is a replacement spark arrestor for 3M™ Adflo™ Powered Air Respirator. Our spark arrestor prevents sparks from entering the filter.

Prevent sparks from entering your 3M™ Adflo™ Powered Air Respirator filter with 3M™ Adflo™ Spark Arrestor, 836000. Regularly checking the condition of your 3M™ Adflo™ Powered Air Respirator and examining it for any damage or breakthrough is important in maintaining your health and safety. If any damage is evident, it must be replaced immediately. To increase service life, make it a habit to check your equipment regularly.

Replacement pack of hoods for Primair-VL

LIGHTWEIGHT AND EASY TO USE • Wide field of view • Adjustable headband • Replaceable upper elements • Reusable headband and tubes to reduce costs • Air delivery hose to the visor: anti-fog, no cold air directed towards the user’s head • Extremely light semi-disposable hood: The disposable part is Tyvek coated to ensure high chemical resistance • Easy to replace: with two push buttons on the side Areas of application • Laboratories, pharmaceutical, light industries Compatible with: • Honeywell North PA700 PAPR