Replacement Hinge Mechanism for 3M™ Speedglas™ Welding Helmet 9100 FX/ FX Air

• Replaces worn or damaged air deflectors
• For use with 3M™ Speedglas™ Welding Helmet 9100 FX-Air
• Ensures you get the correct level of comfort and protection
• Check your equipment regularly to increase service life

• Replaces worn, damaged or unhygienic face seals
• For use with 3M™ Speedglas™ Welding Helmet 9100 FX-Air
• Ensures you get the correct level of comfort and protection
• Make it a habit to check your equipment regularly for maximum safety

• Helps protect you from molten metal, sparks and flames while you weld
• Made from flame-retardant textiles
• Cotton/para-aramid material
• This product is the regular version that comes standard with the 3M™ Speedglas™ Welding Helmets 9100 FX and 9100 FX-Air

• Hygienic replacement part for your welding helmet
• Fleecy cotton material
• For hygiene purposes our sweatbands are typically for replaced once a month or more
• Helps ensure you get the correct level of comfort and protection
• For use with 3M™ Speedglas™ Welding Helmet 9100, 9100FX and 9100-Air
• 3 per pack

Includes FX Headshield, 9100XX ADF, Hose & Carry Bag

Includes FX Headshield, 9100XX ADF, Hose & Carry Bag

Speedglas welding filter 9100XX (Extra Large Viewing Area): variable dark shade 5, 8, 9-13 for most types of arc welding

The big (17 x 10 cm), clear protective visor is curved, with excellent views up, down and peripherally.

Delay function to set the dark-to-light opening time. Possible to lock-in any shade, e.g. in the light state 3 when grinding

Switching time (light-dark) 0.1 ms. The sensitivity of arc detection can be adjusted for unsurpassed switching reliability.

Tack welding comfort mode help minimise eye strain during extended tack welding applications

With the right type of filter, the Adflo respirator effectively protects you against both particles and gases – all in one system

The slim profile and ergonomic design makes it even more lightweight and easier to go into tight welding spaces .

Gas filters are sold separately. You can selectively replace either the particle or the gas filter as needed: you don’t need to change both filters at the same time.

With the right type of filter, the Adflo respirator effectively protects you against both particles and gases – all in one system

Large, curved protective visor with excellent views up,down and peripherally

Ergonomically designed head suspension

• Heavy-duty Li-ion battery
• Fully charges in about 5.5 hours depending on residual capacity
• Operating time between 10 to 13 hours when used with new particle filter and at the standard airflow setting
• For use with 3M™ Adflo™ Powered Air Respirator
• Lightweight and compact for optimum user comfort

• Prevents sparks from entering the filters of the 3M™ Adflo™ Powered Air Respirator
• Check your spark arrestor regularly and assess for any damage
• Replace immediately if any damage is evident
• To increase service life, make it a habit to check your equipment regularly

3M™ Adflo™ Spark Arrestor, 836000, is a replacement spark arrestor for 3M™ Adflo™ Powered Air Respirator. Our spark arrestor prevents sparks from entering the filter.

Prevent sparks from entering your 3M™ Adflo™ Powered Air Respirator filter with 3M™ Adflo™ Spark Arrestor, 836000. Regularly checking the condition of your 3M™ Adflo™ Powered Air Respirator and examining it for any damage or breakthrough is important in maintaining your health and safety. If any damage is evident, it must be replaced immediately. To increase service life, make it a habit to check your equipment regularly.

• Variable dark shade 5, 8-14 and variable dark state colors (for shades 8-14).
• The big, 170 x 104 mm, clear protective visor is curved, with excellent views up, down and peripherally.
• 3M™ Speedglas™ Natural Colour Technology makes the filter view seem lighter, with great clarity before, during and after welding.
• For more control over your comfort, the innovative G5-01 helmet duct system lets you direct the airflow to either your face, visor or somewhere in-between.
• Re-configure your helmet using our many additional accessories to just the right coverage for your head, neck, and shoulders.
• 3M™ Adflo™ Powered Air Respirator helps protect you against both particles and gases in one system, offering the highest safety class: EN12941 TH3 - NPF500.
• Bluetooth enabled with the 3M Connected Equipment app, users get access to additional functionalities, statistics and documentation.
• Comes with a large carry and storage bag to keep your gear protected and clean when not in use.

3M™ Speedglas™ Welding Helmet G5-01 with 3M™ Adflo™ High-Altitude Powered Air Respirator and welding filter G5-01VC, 617830. Get eye, face and respiratory protection (TH3 - NPF 500) with a flip-up welding filter optimized for the needs of heavy-duty welding but can be used for most welding applications.

3M™ Speedglas™ Welding Helmet G5-01 with 3M™ Adflo™ High-Altitude Powered Air Respirator with welding filter G5-01VC 617830offering the highest safety class for powered air systems: EN12941 TH3 - NPF500. Get eye, face and respiratory protection with a flip-up welding filter optimized for the needs of heavy-duty welding but can be used for most welding applications as well as grinding. Comes with a large carry and storage bag to keep your gear protected and clean when not in use. The big, 170 x 104 mm, clear protective visor is curved, with excellent views up, down and peripherally. Welding filter viewing area 73 x 109 mm. Auto-ON/OFF. Variable dark shade 5, 8-14 and variable dark state colors (for shades 8-14). Bluetooth enabled with the 3M Connected Equipment app, users get access to additional functionalities, statistics and documentation.

• Replacement visor frame kit with silver front panel
• For use with 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP
• Ensures you get the correct level of comfort and protection
• Check your equipment regularly to increase service life

3M™ Speedglas™ Front Cover Kit, 540500 is designed for use with 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP. Our spare part kit replaces worn or damaged visor frame kits.

Ensure you get the optimum level of comfort and protection from your welding helmet with 3M™ Speedglas™ Front Cover Kit, 540500. Our spare part replaces worn or damaged visor frame kits in 3M™ Speedglas™ Welding Helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP, and includes the silver front panel. Make it a habit to check your equipment regularly for maximum safety.

• Replaces pitted or scratched inner protection plate for 3M™ Speedglas™ Welding Filters 9100XX, 9100XXi and G5-01
• Plate size: 117 mm x 77 mm
• Protects the inside of surface of the filter from sparks and spatter
• Helps you maintain optimal vision and the correct level of comfort and protection
• Clean with a soft cloth and replace if any pits or scratches occur
• 5 per pack

3M™ Speedglas™ Inner Cover Plate 9100XX, 528025 is our replacement inner protection plate for 3M™ Speedglas™ Welding Filter 9100XX, 9100XXi and G5-01. Available in packs of 5.

Replace your original inner protection plate if it becomes pitted or scratched, with 3M™ Speedglas™ Inner Cover Plate 9100XX, 528025. It protects the inside surface of the filter from sparks and spatter. Our inner protection plate replaces worn or damaged parts and ensures you maintain the correct level of comfort and protection. When your original plate becomes deeply pitted, scratched, or too dirty to clean with a soft cloth, it's time to replace it. Make it a habit to check your equipment regularly for maximum comfort and vision. Available in packs of 5.

• Replaces pitted or scratched outer protection plates for 3M™ Speedglas™ Welding Filter Series 9100 and G5-01.
• Helps protect your welding filter from sparks and welding spatter
• Helps you maintain optimal vision and the correct level of comfort and protection
• Clean with a soft cloth and replace if any pits or scratches occur
• 10 per pack

3M™ Speedglas™ Outer Protection Plate 9100 (heat), 527070 is our extra heat-resistant protection plate for 3M™ Speedglas™ Welding Helmet Series 9100 and G5-01. Available in packs of 10.

Replace your original protection plate if it becomes pitted or scratched, with 3M™ Speedglas™ Outside Protection Plate 9100 (heat), 527070. This plate is extra heat resistant and helps protect you from sparks and spatter. Our outer protection plate replaces worn or damaged parts and ensures you maintain the correct level of comfort and protection. When your orginal plate becomes deeply pitted, scratched or too dirty to clean with a soft cloth, it's probably time to replace it. Make it a habit to check your equipment regularly for maximum comfort and vision. The extra heat-resistant model may extend service life compared to the standard model. Available in packs of 10.

• Protects your Speedglas welding filter series 9100 from sparks and spatter
• Scratch resistant
• Replaces worn or damaged original protection plates
• Regularly clean with a soft cloth and replace if any pits or scratches occur
• Failure to use an outside protection plate with the filter voids the warranty if sparks or spatter contaminate the glass

3M™ Speedglas™ Outside Protection Plate 9100 (scratch resistant), 527000 replaces worn or damaged original protection plates. Our spare part protects your welding filter from sparks and spatter..

Protect your Speedglas welding filter series 9100 from sparks and spatter with the scratch resistant 3M™ Speedglas™ Outside Protection Plate 9100, 527000. Our extra scratch-resistant spare part replaces your original protection plate if it becomes worn or damaged. Regularly clean with a soft cloth and replace if any pits or scratches occur. Failure to use an outside protection plate with the filter voids the warranty if sparks or spatter contaminate the glass. 

• Replaces pitted or scratched anti-fog visor plates
• Specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP
• 5 per pack
• Regularly clean with a soft cloth and replace if pits or scratches occur

3M™ Speedglas™ Visor Plate, 523001 is specially designed for 3M™ Speedglas™ Welding Helmets 9100FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP. Our spare part replaces worn or damaged protective visors (anti-fog) and there are 5 in each pack.

For a replacement anti-fog visor plate, get 3M™ Speedglas™ Visor Plate, 523001. Our spare part replaces worn or damaged visors. Regularly clean with a soft cloth and replace if any pits or scratches occur. They’re specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP, and this is a pack of 5

Details

• Pre-filter designed for use with 3M™ Versaflo™ Powered Air Respirator TR-300+
• Captures large particles that would otherwise clog the filter
• Can help to extend the filter life of your powered air respirator

The 3M™ Versaflo™ Pre Filter TR-3600 for use with the 3M™ Versaflo™ Powered Air Respirator TR-300. A Pre Filter can extend the life of the Powered Air Respirator by capturing large particles that would otherwise clog the filter. 10 filters per pack

Capture large particles that would otherwise quickly clog filters with 3M™ Versaflo™ Pre-Filter, TR-3600. Our pre-filter can potentially extend the life of your filter used with the 3M™ Versaflo™ Powered Air Respirator TR-300+ by preventing bigger objects from blocking the filter media

Details

• Powered air turbo kit that keeps workers comfortable and protected for their work day
• Multiple airflow rate options for user comfort
• Ergonomically designed to fit close to the body and allow for greater movement in tight work spaces
• Multiple belt size adjustments for proper fit and comfort
• Belt designed with flexible air channels to minimise heat buildup

With user-selectable airflow rates, rugged construction and a comfortable design that will see you through the entire shift, the 3M™ Versaflo™ Powered Air Turbo TR-600 helps provide durable protection in harsh environments. The kit includes the TR-602UK Turbo, A2P filter, filter cover, prefilters (x10), spark arrestor (x2), easy clean belt, high capacity battery, single station battery charger kit, BT-30 length adjusting breathing tube and airflow indicator

Details

• Provides respiratory protection against organic gases and vapours with boiling points > 65 °C and particulates
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series
• Simple to install
• 3M recommends using filter cover TR-6300FC to protect the filter from physical damage
• CE approved

A2P filter for use with the 3M™ Versaflo™ Powered Air Turbo TR-600 Series. The filter attaches directly to the turbo. 3M recommends the use of the TR-6300FC filter cover to help protect the filter from physical damage. The TR-6300FC filter cover is also used to hold the TR-6600 prefilter or TR-662 spark arrestor in place.

Get effective respiratory protection against particulates, and organic gases and vapours with boiling points > 65 °C with 3M™ Versaflo™ A2P Filter, TR-6310E. Our filter is designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It’s quick and simple to install and can be protected from physical damage using filter cover TR-6300FC. The filter cover can also be used to hold the prefilter TR-6600 or spark arrestor TR-662 in place for further protection

Details

• Provides respiratory protection against organic gases and vapours with boiling points > 65°C, inorganic and acid gases, ammonia, mercury vapour and particulates
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series
• Simple to install
• 3M recommends using filter cover TR-6300FC to protect ABE2K1HgP filter from physical damage
• CE approved

ABE2K1HgP filter for use with the 3M™ Versaflo™ Powered Air Turbo TR-600 Series. The filter attaches directly to the turbo.

Get effective respiratory protection against a range of hazards with 3M™ Versaflo™ ABE2K1HgP Filter, TR-6580E. Designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series, our filter protects against organic gases and vapours with boiling points > 65°C, inorganic and acid gases and ammonia. It also protects against mercury vapour and particulates. It’s quick and simple to install directly onto the turbo unit and can be protected from physical damage using the filter cover TR-6500FC.

With the right type of filter, the Adflo respirator effectively protects you against both particles and gases – all in one system. Incorporating a Li-ion battery, making the turbo almost 20% lighter in weight.
To remove unpleasant smells an odour filter can be added (not needed if a gas filter is installed) – sold separately.
The airflow is always a constant nominal rate of 170 litres per minute, regardless of the battery’s charge or the particle loading of the filter.
For hot, humid jobs, you can increase the airflow to 200 litres per minute by simply pushing the ON button a second time.
The lightweight Lithium-ion battery fully charges in 4,5 hours and has a operating time of 7-9 hours. If you like to extend operating time, there is a heavy-duty battery option available.
To order a complete welding helmet system, first select headtop.

Items included: Adflo powered air respirator with self-adjusting breathing tube QRS, airflow indicator, prefilter, spark arrestor, particle filter, standard battery, belt and charger.

Replace when you Adflo particle filter indicator becomes red. Otherwise, replace whenever the battery operating time becomes too short, or when ”fully loaded” filter triggers low airflow alarm.
Simple to install.
For maximum safety and comfort, make it a habit to check your equipment regularly. Replace worn out or damaged parts.

Prefilter can extend the service life of your Adflo particle filter by capturing large particles that may otherwise clog the filter
The prefilter must be installed and used according to the User Instructions
May reduce operating costs by extending the life of the filters

• The Duraflow powered air starter pack is a lightweight, low profile ergonomic design which provides comfort even over extended durations of hard work.
• The Duraflow Starter Pack comes complete with, powered air unit, standard duration battery, standard belt, and charger (excludes hose, headtop and filters).
• Powered air respirator with intelligence in the unit, constantly monitoring the flowrate in real-time to ensure correct flowrate delivered to user
• Compatible with a wide range of headtops, filters and accessories for a variety of hazardous applications
• Weighing approx 600g (without filters or battery), the Duraflow is ultra-light for comfortable long shift duration
• The Duraflow is compatible with selected Pro2000 filters.
• Tested and certified to EN12941

Replacement Battery for HA180, HA181 & HA182