Backpack for HA188, HA189 & HA190

Replacement pack of hoods for Primair-VL

LIGHTWEIGHT AND EASY TO USE • Wide field of view • Adjustable headband • Replaceable upper elements • Reusable headband and tubes to reduce costs • Air delivery hose to the visor: anti-fog, no cold air directed towards the user’s head • Extremely light semi-disposable hood: The disposable part is Tyvek coated to ensure high chemical resistance • Easy to replace: with two push buttons on the side Areas of application • Laboratories, pharmaceutical, light industries Compatible with: • Honeywell North PA700 PAPR

• Prevents sparks from entering the filters of the 3M™ Adflo™ Powered Air Respirator
• Check your spark arrestor regularly and assess for any damage
• Replace immediately if any damage is evident
• To increase service life, make it a habit to check your equipment regularly

3M™ Adflo™ Spark Arrestor, 836000, is a replacement spark arrestor for 3M™ Adflo™ Powered Air Respirator. Our spark arrestor prevents sparks from entering the filter.

Prevent sparks from entering your 3M™ Adflo™ Powered Air Respirator filter with 3M™ Adflo™ Spark Arrestor, 836000. Regularly checking the condition of your 3M™ Adflo™ Powered Air Respirator and examining it for any damage or breakthrough is important in maintaining your health and safety. If any damage is evident, it must be replaced immediately. To increase service life, make it a habit to check your equipment regularly.

Pre-Filters for the PowerCap® Infinity® PAPR - Pack of 100 (No covers)

Pre-filters (No covers) for the PowerCap® Infinity®. It is recomended that pre-filters are changed daily before use.

Only use genuine PowerCap® Infinity® filters supplied in pairs from JSP Ltd or its distributors. Always replace both filters simultaneously. NEVER use compressed air on the filters. This will seriously limit protection.

PowerCap® Infinity® delivers TH3 protection with a Nominal Protection Factor of 500 (UK APF 40). TH3 is the highest possible rating in the EN 12941:1998 + A2:2008 standard.

 • Soft, silicone facepiece that makes them comfortable to wear
• Four-strap suspension means the mask is easy to put on and take off
• Large polycarbonate lens offers good visibility and is impact resistant to EN166:B
• 3M™ Cool Flow™ Valve helps reduce heat and moisture build-up and provides less restriction to your breathing

Details

• Provides respiratory protection against organic gases and vapours with boiling points > 65°C, inorganic and acid gases, ammonia, mercury vapour and particulates
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series
• Simple to install
• 3M recommends using filter cover TR-6300FC to protect ABE2K1HgP filter from physical damage
• CE approved

ABE2K1HgP filter for use with the 3M™ Versaflo™ Powered Air Turbo TR-600 Series. The filter attaches directly to the turbo.

Get effective respiratory protection against a range of hazards with 3M™ Versaflo™ ABE2K1HgP Filter, TR-6580E. Designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series, our filter protects against organic gases and vapours with boiling points > 65°C, inorganic and acid gases and ammonia. It also protects against mercury vapour and particulates. It’s quick and simple to install directly onto the turbo unit and can be protected from physical damage using the filter cover TR-6500FC.

• Replacement particle filter P SL for 3M™ Adflo™ Powered Air Respirator
• Simple to install and must always be used to maintain service life of your respirator
• Replace when particle filter indicator becomes red, when the battery operating time becomes too short or when "fully loaded" filter triggers low airflow alarm
• To increase service life, make it a habit to check your equipment regularly
• 2 per pack

3M™ Adflo Particle Filter, 837012, is designed to replace worn or damaged particle filters in 3M™ Adflo™ Powered Air Respirator. There are two in each pack.

Ensure optimum performance from your 3M™ Adflo™ Powered Air Respirator, with 3M™ Adflo Particle Filter, 837012. Our replacement particle filter is simple to install and must always be used. It should be replaced when the particle filter indicator becomes red, the battery operating time becomes too short or when a "fully loaded" filter triggers a low airflow alarm. There are two in each pack. To increase service life, make it a habit to check your equipment regularly.

• Replaces pitted or scratched anti-fog visor plates
• Specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP
• 5 per pack
• Regularly clean with a soft cloth and replace if pits or scratches occur

3M™ Speedglas™ Visor Plate, 523001 is specially designed for 3M™ Speedglas™ Welding Helmets 9100FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP. Our spare part replaces worn or damaged protective visors (anti-fog) and there are 5 in each pack.

For a replacement anti-fog visor plate, get 3M™ Speedglas™ Visor Plate, 523001. Our spare part replaces worn or damaged visors. Regularly clean with a soft cloth and replace if any pits or scratches occur. They’re specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP, and this is a pack of 5

5935 P3R Particulate filters for use with 3M? Gas and Vapour Filters. Use in combination with 3M? 6000 Series Gas and Vapour Filters with a 3M? 501 Filter Retainer for combined gas/vapour and particulate protection. Extremely lightweight. Standard: EN143, Approval: CE marked.

Replace when you Adflo particle filter indicator becomes red. Otherwise, replace whenever the battery operating time becomes too short, or when ”fully loaded” filter triggers low airflow alarm.
Simple to install.
For maximum safety and comfort, make it a habit to check your equipment regularly. Replace worn out or damaged parts.

Details

• Provides respiratory protection against organic gases and vapours with boiling points > 65 °C and particulates
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series
• Simple to install
• 3M recommends using filter cover TR-6300FC to protect the filter from physical damage
• CE approved

A2P filter for use with the 3M™ Versaflo™ Powered Air Turbo TR-600 Series. The filter attaches directly to the turbo. 3M recommends the use of the TR-6300FC filter cover to help protect the filter from physical damage. The TR-6300FC filter cover is also used to hold the TR-6600 prefilter or TR-662 spark arrestor in place.

Get effective respiratory protection against particulates, and organic gases and vapours with boiling points > 65 °C with 3M™ Versaflo™ A2P Filter, TR-6310E. Our filter is designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It’s quick and simple to install and can be protected from physical damage using filter cover TR-6300FC. The filter cover can also be used to hold the prefilter TR-6600 or spark arrestor TR-662 in place for further protection

Replacement visor for the PowerCap® Infinity® & Jetstream®. The visor provides Grade B impact protection meeting the requirements of EN 166 against high speed particles.

The 3M™ Aura™ Disposable Respirator 9332+ provides comfort and style without compromising performance. Protects against dusts and mists found in a wide variety of industrial applications and other work situations requiring FFP3 protection.

Get FFP3 protection against dusts, mists and metal fumes in a wide variety of industrial applications and other hazardous environments, with 3M™ Aura™ Particulate Respirator 9332+. The ingenious 3 panel design allows for greater facial movement, while the sculpted, low profile style of the embossed upper panel creates an effective seal, reduces eyewear fogging and improves eyewear compatibility.

It features the 3M™ Cool Flow™ Valve that helps reduce heat build-up in hot and humid conditions, and the low resistance filter technology helps you breathe easily. The flat fold design makes it convenient to store when not in use, and the innovative chin tab allows you to make simple adjustments. The braided, colour coded headbands help you identify the protection level offered: red for FFP3 (NPF 50).

This respirator is individually packed in hygienic wrapping to protect against contamination, and it’s designed to work well with 3M Eyewear and Hearing Protection products.

Features and Benefits

Flat fold disposable FFP3 respirator offering reliable, effective protection against higher levels of fine dust, mists and metal fume

Low breathing resistance filter technology for easier breathing through your shift

Ingenious 3-panel design that accommodates greater facial movement during speech so much more comfortable to wear

An embossed top panel to reduce fogging of eyewear

Headbands are coloured for easy identification: red for FFP3

An innovative chin tab for ease of donning and adjustment of the respirator on the face

Supplied in hygienic packaging to help protect the respirator from contamination before use, also allows practical storage and dispensing in the workplace.

Sculpted nose panel helps conform to the nose and contours of the face and helps to improve compatibility with 3M eyewear

• Replaces worn, damaged or unhygienic face seals
• For use with 3M™ Speedglas™ Welding Helmet 9100 FX-Air
• Ensures you get the correct level of comfort and protection
• Make it a habit to check your equipment regularly for maximum safety

• Replaces pitted or scratched outer protection plates for 3M™ Speedglas™ Welding Filter Series 9100 and G5-01.
• Helps protect your welding filter from sparks and welding spatter
• Helps you maintain optimal vision and the correct level of comfort and protection
• Clean with a soft cloth and replace if any pits or scratches occur
• 10 per pack

3M™ Speedglas™ Outer Protection Plate 9100 (heat), 527070 is our extra heat-resistant protection plate for 3M™ Speedglas™ Welding Helmet Series 9100 and G5-01. Available in packs of 10.

Replace your original protection plate if it becomes pitted or scratched, with 3M™ Speedglas™ Outside Protection Plate 9100 (heat), 527070. This plate is extra heat resistant and helps protect you from sparks and spatter. Our outer protection plate replaces worn or damaged parts and ensures you maintain the correct level of comfort and protection. When your orginal plate becomes deeply pitted, scratched or too dirty to clean with a soft cloth, it's probably time to replace it. Make it a habit to check your equipment regularly for maximum comfort and vision. The extra heat-resistant model may extend service life compared to the standard model. Available in packs of 10.

• Helps protect you from molten metal, sparks and flames while you weld
• Made from flame-retardant textiles
• Cotton/para-aramid material
• This product is the regular version that comes standard with the 3M™ Speedglas™ Welding Helmets 9100 FX and 9100 FX-Air

Combined safety goggle and half mask for protection from dust, metal fumes, oil and water mists and micro-organisms, i.e. bacteria and viruses

3 ply reusable fabric mask with breathable inner cotton fabric for all day comfort. Elasticated ear loops for the perfect fit. Machine washable at 60 degrees. Folded flat, each mask is packed inside an individual hygienic polybag. 25 masks per retail box.