• Replaces pitted or scratched anti-fog visor plates
• Specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP
• 5 per pack
• Regularly clean with a soft cloth and replace if pits or scratches occur

3M™ Speedglas™ Visor Plate, 523001 is specially designed for 3M™ Speedglas™ Welding Helmets 9100FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP. Our spare part replaces worn or damaged protective visors (anti-fog) and there are 5 in each pack.

For a replacement anti-fog visor plate, get 3M™ Speedglas™ Visor Plate, 523001. Our spare part replaces worn or damaged visors. Regularly clean with a soft cloth and replace if any pits or scratches occur. They’re specially designed for Speedglas welding helmets 9100 FX, 9100 FX-Air, 9100 MP-Lite and 9100 MP, and this is a pack of 5

• Replacement particle filter P SL for 3M™ Adflo™ Powered Air Respirator
• Simple to install and must always be used to maintain service life of your respirator
• Replace when particle filter indicator becomes red, when the battery operating time becomes too short or when "fully loaded" filter triggers low airflow alarm
• To increase service life, make it a habit to check your equipment regularly
• 2 per pack

3M™ Adflo Particle Filter, 837012, is designed to replace worn or damaged particle filters in 3M™ Adflo™ Powered Air Respirator. There are two in each pack.

Ensure optimum performance from your 3M™ Adflo™ Powered Air Respirator, with 3M™ Adflo Particle Filter, 837012. Our replacement particle filter is simple to install and must always be used. It should be replaced when the particle filter indicator becomes red, the battery operating time becomes too short or when a "fully loaded" filter triggers a low airflow alarm. There are two in each pack. To increase service life, make it a habit to check your equipment regularly.

 • Soft, silicone facepiece that makes them comfortable to wear
• Four-strap suspension means the mask is easy to put on and take off
• Large polycarbonate lens offers good visibility and is impact resistant to EN166:B
• 3M™ Cool Flow™ Valve helps reduce heat and moisture build-up and provides less restriction to your breathing

Details

• Provides respiratory protection against organic gases and vapours with boiling points > 65°C, inorganic and acid gases, ammonia, mercury vapour and particulates
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series
• Simple to install
• 3M recommends using filter cover TR-6300FC to protect ABE2K1HgP filter from physical damage
• CE approved

ABE2K1HgP filter for use with the 3M™ Versaflo™ Powered Air Turbo TR-600 Series. The filter attaches directly to the turbo.

Get effective respiratory protection against a range of hazards with 3M™ Versaflo™ ABE2K1HgP Filter, TR-6580E. Designed to be used with 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series, our filter protects against organic gases and vapours with boiling points > 65°C, inorganic and acid gases and ammonia. It also protects against mercury vapour and particulates. It’s quick and simple to install directly onto the turbo unit and can be protected from physical damage using the filter cover TR-6500FC.

Pre-Filters for the PowerCap® Infinity® PAPR - Pack of 100 (No covers)

Pre-filters (No covers) for the PowerCap® Infinity®. It is recomended that pre-filters are changed daily before use.

Only use genuine PowerCap® Infinity® filters supplied in pairs from JSP Ltd or its distributors. Always replace both filters simultaneously. NEVER use compressed air on the filters. This will seriously limit protection.

PowerCap® Infinity® delivers TH3 protection with a Nominal Protection Factor of 500 (UK APF 40). TH3 is the highest possible rating in the EN 12941:1998 + A2:2008 standard.

• Prevents sparks from entering the filters of the 3M™ Adflo™ Powered Air Respirator
• Check your spark arrestor regularly and assess for any damage
• Replace immediately if any damage is evident
• To increase service life, make it a habit to check your equipment regularly

3M™ Adflo™ Spark Arrestor, 836000, is a replacement spark arrestor for 3M™ Adflo™ Powered Air Respirator. Our spark arrestor prevents sparks from entering the filter.

Prevent sparks from entering your 3M™ Adflo™ Powered Air Respirator filter with 3M™ Adflo™ Spark Arrestor, 836000. Regularly checking the condition of your 3M™ Adflo™ Powered Air Respirator and examining it for any damage or breakthrough is important in maintaining your health and safety. If any damage is evident, it must be replaced immediately. To increase service life, make it a habit to check your equipment regularly.

Replacement pack of hoods for Primair-VL

LIGHTWEIGHT AND EASY TO USE • Wide field of view • Adjustable headband • Replaceable upper elements • Reusable headband and tubes to reduce costs • Air delivery hose to the visor: anti-fog, no cold air directed towards the user’s head • Extremely light semi-disposable hood: The disposable part is Tyvek coated to ensure high chemical resistance • Easy to replace: with two push buttons on the side Areas of application • Laboratories, pharmaceutical, light industries Compatible with: • Honeywell North PA700 PAPR

Backpack for HA188, HA189 & HA190

• Ensures your 3M™ Adflo™ Powered Air Respirator stays fully-charged, safe and ready to use
• Charges Li-ion batteries
• Replaces worn or damaged chargers
• Increase the service life of your equipment by checking it regularly

3M™ Adflo™ Battery Charger, 833111 replaces worn or damaged parts for 3M™ Adflo™ Powered Air Respirator. Our replacement battery charger is designed for Li-ion batteries.

Keep your respirator equipment fully-charged, safe and ready to use, with 3M™ Adflo™ Battery Charger, 833111. Our spare battery charger is designed to charge the Li-ion batteries in your 3M™ Adflo™ Powered Air Respirator and replaces worn or damaged equipment. Increase the service life of your equipment by checking it regularly.

• Standard Li-ion battery
• Fully charges in 4-5 hours depending on residual capacity
• Operating time between 7 and 9 hours when used with a new particle filter at the standard airflow setting
• For use with 3M™ Adflo™ Powered Air Respirator
• Lightweight and compact for optimum user comfort

3M™ Adflo™ Li-ion Battery, 837630 is our standard battery designed for use with 3M™ Adflo™ Powered Air Respirator.

Ensure your 3M™ Adflo™ Powered Air Respirator is fully operational with 3M™ Adflo™ Li-ion Battery, 837630. Our standard Li-ion battery fully charges in about 4-5 hours depending on residual capacity. When new, the fully-charged battery provides between 7 and 9 hours of operating time when the respirator is used with a new particle filter and a standard airflow setting. Compact and lightweight for optimum user comfort during a full shift.

• Heavy-duty Li-ion battery
• Fully charges in about 5.5 hours depending on residual capacity
• Operating time between 10 to 13 hours when used with new particle filter and at the standard airflow setting
• For use with 3M™ Adflo™ Powered Air Respirator
• Lightweight and compact for optimum user comfort

Honeywell’s respiratory PAPR faceshield with integrated impact resistant visor, enhanced ergonomics and comfort, appealing aesthetics and more user-friendly headgear that is suitable for use in working areas where eye/ear/ face protection could be required. This assembly includes the PA032 breathing tube for the PA900 series used to connect the headgear to the PA500EU series or PA700EU series PAPR of your choice.

Replacement Battery for HA180, HA181 & HA182

PowerBox2™ Battery Pack for the PowerCap® Infinity®.

• Lightweight, high capacity, lithium-ion battery pack
• Designed for use with 3M™ Versaflo™ Powered Air Turbo TR-600 Series
• Charges in under four hours with light-up charge level indicator
• Provides extended duration when compared to TR-630 Standard Battery (when used under equivalent conditions)
• Rinseable and temporarily submergible for easy cleaning
• Easy to see battery charge level
• CE approved

When equipped with a new high capacity battery (TR-632) and new particulate filter (TR-6710E), the system has a run time of 9.5 - 19 hours. System duration will vary based on battery age, filter loading, filter selection and user selected air flow setting. Under equivalent conditions, the TR-632 high capacity battery provides extended system durations when compared to the TR-630 standard battery. The TR-632 will charge in less than 4 hours. See User Instruction for further information on system durations.

For a lightweight, rechargeable and long-lasting lithium-ion battery for 3M™ Versaflo™ Powered Air Turbo TR-600 Series, use 3M™ Versaflo™ Battery, High Capacity, TR-632. A new high capacity battery can provide your turbo system with 9.5-19 hours of use at a standard flow rate when equipped with a new particulate filter (TR-6710E). System duration will vary based on battery age, filter loading, filter selection and user selected airflow setting. Under equivalent conditions, the TR-632 high capacity battery provides extended system durations when compared to the TR-630 standard battery. This battery back charges in less than four hours and features a light-up charge level indicator. It’s practical and can be rinsed or temporarily submerged in water for easy cleaning. See User Instructions for further information.

Honeywell’s respiratory PAPR faceshield with a hard hat for head protection to EN 397+A1. Features an integrated impact resistant visor, enhanced ergonomics, appealing aesthetics and more user-friendly headgear. Suitable for use in working areas where eyes/face/ears and head protection are required. This assembly includes the PA032 breathing tube for the PA900 series used to connect the headgear to the PA500EU series or PA700EU series PAPR of your choice

• Auto-darkening filter for most types of arc welding
• Designed for 3M™ Speedglas™ Welding Helmet Series 9100
• Variable dark shades 5, 8 and 9 through 13
• Light shade 3
• Viewing area: 54 mm x 107 mm
• Delay function sets the dark-to-light opening time
• Switching time (light-dark) of 0.1 ms
• The sensitivity of arc detection can be adjusted for unsurpassed switching reliability
• Tack welding comfort mode help minimize eye strain during extended tack welding applications

3M™ Speedglas™ Auto-darkening Filter 9100X, 500015 is designed for use with 3M™ Speedglas™ Welding Helmet Series 9100. Our filter features dark shades 5, 8, 9 to 13, a switching time (light-dark) of 0.1 ms, and a viewing area of 54 mm x 107 mm.

For an auto-darkening filter with seven variable dark shades (5, 8 and 9-13) for most types of arc welding, get 3M™ Speedglas™ Auto-darkening Filter 9100X, 500015. It has a viewing area of 54 mm x 107 mm and is made for the professional welder. Our 3M™ Speedglas™ Welding Filter 9100 Series features uniform shading and minimal distortion across the entire filter viewing area. The delay function sets the dark-to-light opening time, and it’s possible to lock-in any shade, e.g. in light state 3 when grinding. It has a switching time (light-dark) of 0.1 ms, and the sensitivity of the arc detection can be adjusted for reliable switching. Tack welding comfort mode also helps minimise eye strain during extended tack welding applications.

Includes FX Headshield, 9100XX ADF, Hose & Carry Bag

2.5 ADF PAPR Welding Helmet

• The Duraflow powered air starter pack is a lightweight, low profile ergonomic design which provides comfort even over extended durations of hard work.
• The Duraflow Starter Pack comes complete with, powered air unit, standard duration battery, standard belt, and charger (excludes hose, headtop and filters).
• Powered air respirator with intelligence in the unit, constantly monitoring the flowrate in real-time to ensure correct flowrate delivered to user
• Compatible with a wide range of headtops, filters and accessories for a variety of hazardous applications
• Weighing approx 600g (without filters or battery), the Duraflow is ultra-light for comfortable long shift duration
• The Duraflow is compatible with selected Pro2000 filters.
• Tested and certified to EN12941