PPE :: Respiratory Protection

3M™ Adflo™ Spark Arrestor [PK of 10]

£150.57

Code: SHA229

Prevents sparks from entering the filters of the 3M™ Adflo™ Powered Air Respirator
Check your spark arrestor regularly and assess for any damage
Replace immediately if any damage is evident
To increase service life, make it a habit to check your equipment regularly

3M™ Adflo™ Spark Arrestor, 836000, is a replacement spark arrestor for 3M™ Adflo™ Powered Air Respirator. Our spark arrestor prevents sparks from entering the filter.

Prevent sparks from entering your 3M™ Adflo™ Powered Air Respirator filter with 3M™ Adflo™ Spark Arrestor, 836000. Regularly checking the condition of your 3M™ Adflo™ Powered Air Respirator and examining it for any damage or breakthrough is important in maintaining your health and safety. If any damage is evident, it must be replaced immediately. To increase service life, make it a habit to check your equipment regularly.

Availability: Available in 3-10 days

3M™ Adflo™ Prefilter [PK of 5]

£24.41

Code: SHA235

Regular replacement of the Adflo™ pre-filter extends the life of the particle filter, saving money while also increasing the battery run-time
Inspect your pre-filter regularly for any damage, clogging or breakthrough
Do not attempt to clean the pre-filter
For use with the 3M™ Adflo™ Powered Air Respirator
5 per pack

3M™ Adflo™ Prefilter, 836010, is a replacement prefilter designed for use with 3M™ Adflo™ Powered Air Respirator. There are 5 in each pack.

Increase the battery run-time and reduce operating costs when using 3M™ Adflo™ Powered Air Respirator with 3M™ Adflo™ Prefilter, 836010. Our prefilter captures large particles that may otherwise clog the particle filter, reducing operating costs by extending its life. It can also increase battery life efficiency. It comes as a pack of five and must be installed and used according to the user instructions. To increase service life, make it a habit to check your equipment regularly.

Availability: In stock

Minimum quantity for "3M™ Adflo™ Prefilter [PK of 5]" is 2.

3M™ Adflo™ Particle Filter P SL [PK of 2]

£110.63

Code: SHA236

Replacement particle filter P SL for 3M™ Adflo™ Powered Air Respirator
Simple to install and must always be used to maintain service life of your respirator
Replace when particle filter indicator becomes red, when the battery operating time becomes too short or when "fully loaded" filter triggers low airflow alarm
To increase service life, make it a habit to check your equipment regularly
2 per pack

3M™ Adflo Particle Filter, 837012, is designed to replace worn or damaged particle filters in 3M™ Adflo™ Powered Air Respirator. There are two in each pack.

Ensure optimum performance from your 3M™ Adflo™ Powered Air Respirator, with 3M™ Adflo Particle Filter, 837012. Our replacement particle filter is simple to install and must always be used. It should be replaced when the particle filter indicator becomes red, the battery operating time becomes too short or when a "fully loaded" filter triggers a low airflow alarm. There are two in each pack. To increase service life, make it a habit to check your equipment regularly.

Availability: Available in 3-10 days

3M™ Adflo™ Li-ion Battery, Standard

£214.27

Code: SHA239

Standard Li-ion battery
Fully charges in 4-5 hours depending on residual capacity
Operating time between 7 and 9 hours when used with a new particle filter at the standard airflow setting
For use with 3M™ Adflo™ Powered Air Respirator
Lightweight and compact for optimum user comfort

3M™ Adflo™ Li-ion Battery, 837630 is our standard battery designed for use with 3M™ Adflo™ Powered Air Respirator.

Ensure your 3M™ Adflo™ Powered Air Respirator is fully operational with 3M™ Adflo™ Li-ion Battery, 837630. Our standard Li-ion battery fully charges in about 4-5 hours depending on residual capacity. When new, the fully-charged battery provides between 7 and 9 hours of operating time when the respirator is used with a new particle filter and a standard airflow setting. Compact and lightweight for optimum user comfort during a full shift.

Availability: Available in 3-10 days

3M™ Adflo™ Heavy-Duty Li-ion Battery

£252.57

Code: SHA198

Heavy-duty Li-ion battery
Fully charges in about 5.5 hours depending on residual capacity
Operating time between 10 to 13 hours when used with new particle filter and at the standard airflow setting
For use with 3M™ Adflo™ Powered Air Respirator
Lightweight and compact for optimum user comfort

Availability: Available in 3-10 days

Minimum quantity for "3M™ Adflo™ Heavy-Duty Li-ion Battery" is 1.

3M™ Adflo™ Battery Charger, For Li-ion Battery

£191.96

Code: SHA238

Ensures your 3M™ Adflo™ Powered Air Respirator stays fully-charged, safe and ready to use
Charges Li-ion batteries
Replaces worn or damaged chargers
Increase the service life of your equipment by checking it regularly

3M™ Adflo™ Battery Charger, 833111 replaces worn or damaged parts for 3M™ Adflo™ Powered Air Respirator. Our replacement battery charger is designed for Li-ion batteries.

Keep your respirator equipment fully-charged, safe and ready to use, with 3M™ Adflo™ Battery Charger, 833111. Our spare battery charger is designed to charge the Li-ion batteries in your 3M™ Adflo™ Powered Air Respirator and replaces worn or damaged equipment. Increase the service life of your equipment by checking it regularly.

Availability: Available in 3-10 days

3M™ 8835+ FFP3 Valved Particulate Respirator [Bx 5]

£47.52

Code: HA423

3M 8835 P3 Disposable Respirator BX5

Availability: Available in 3-10 days

3M™ 6000 Series Half Mask

£23.06

Code: SHA029P

3M 6300 Half Mask

Availability: In stock

3M™ 6000 Series Full Face Mask Respirators

£117.42

Code: SHA203P

• Soft, silicone facepiece that makes them comfortable to wear
• Four-strap suspension means the mask is easy to put on and take off
• Large polycarbonate lens offers good visibility and is impact resistant to EN166:B
• 3M™ Cool Flow™ Valve helps reduce heat and moisture build-up and provides less restriction to your breathing

Availability: In stock

3M Versaflo™ TR-3822E Nuisance Level Acid Gas Filter

£51.80

Code: SHA139

For use with 3M™ TR-300 Series Powered Air Respirators
Particulate filter and nuisance odour options
Individually packaged
Simple to install

3M™ Versaflo™ TR-300 Series Powered Air Respirator Filters are designed for use with 3M™ TR-300+ Series Powered Air Respirators.

Different tasks require different protection. Particulate filters help protect against particles such as dust and debris. Filters are easy to connect to the 3M™ Versaflo™ Powered Air Respirator, TR-302E+ features an audible and visual alarm to let you know when to replace your filter.

Availability: Available in 3-10 days

3M Versaflo TR-3802E P+ Nuisance Level Organic Vapour Filter

£44.46

Code: SHA075

3M Versaflo P+ Nuisance Level Organic Vapour Filter

Availability: Available in 3-10 days

Minimum quantity for "3M Versaflo TR-3802E P+ Nuisance Level Organic Vapour Filter" is 5.

3M Speedglass 9100 XXi FX Air Adflow System complete

£1,686.36

Code: SHA138

Speedglas welding filter 9100XX (Extra Large Viewing Area): variable dark shade 5, 8, 9-13 for most types of arc welding

The big (17 x 10 cm), clear protective visor is curved, with excellent views up, down and peripherally.

Delay function to set the dark-to-light opening time. Possible to lock-in any shade, e.g. in the light state 3 when grinding

Switching time (light-dark) 0.1 ms. The sensitivity of arc detection can be adjusted for unsurpassed switching reliability.

Tack welding comfort mode help minimise eye strain during extended tack welding applications

With the right type of filter, the Adflo respirator effectively protects you against both particles and gases – all in one system

The slim profile and ergonomic design makes it even more lightweight and easier to go into tight welding spaces .

Gas filters are sold separately. You can selectively replace either the particle or the gas filter as needed: you don’t need to change both filters at the same time.

With the right type of filter, the Adflo respirator effectively protects you against both particles and gases – all in one system

Large, curved protective visor with excellent views up,down and peripherally

Ergonomically designed head suspension

Availability: Available in 3-10 days

Minimum quantity for "3M Speedglass 9100 XXi FX Air Adflow System complete" is 1.

3M Speedglass 9100 XX FX upgrade kit

Contact us for a price

Code: SHA136

Includes FX Headshield, 9100XX ADF, Hose & Carry Bag

Availability: Available in 3-10 days

3M Speedglass 9100 XX FX upgrade kit

£969.76

Code: SHA137

Includes FX Headshield, 9100XX ADF, Hose & Carry Bag

Availability: Available in 3-10 days

3M Speedglas Sweatband, Series 9100, pack of 3

£22.21

Code: SHA210

Hygienic replacement part for your welding helmet
Fleecy cotton material
For hygiene purposes our sweatbands are typically for replaced once a month or more
Helps ensure you get the correct level of comfort and protection
For use with 3M™ Speedglas™ Welding Helmet 9100, 9100FX and 9100-Air
3 per pack

Availability: Available in 3-10 days

Minimum quantity for "3M Speedglas Sweatband, Series 9100, pack of 3" is 1.

3M Speedglas Headcover, Series 9100 FX-Air

£58.63

Code: SHA211

Helps protect you from molten metal, sparks and flames while you weld
Made from flame-retardant textiles
Cotton/para-aramid material
This product is the regular version that comes standard with the 3M™ Speedglas™ Welding Helmets 9100 FX and 9100 FX-Air

Availability: Available in 3-10 days

Minimum quantity for "3M Speedglas Headcover, Series 9100 FX-Air" is 1.

T: 0800 122 33 23

Respiratory Protection

Respiratory Protection

Recently Viewed

General

Customer Services

Account Info

Sign up to our news and offers:

T: 0800 122 33 23

Respiratory Protection

Respiratory Protection

Recently Viewed

General

Customer Services

Account Info

Sign up to our news and offers:

Get social